參數資料
型號： M37477E8SP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP32
封裝： SHRINK, PLASTIC, DIP-32
文件頁數： 14/47頁
文件大小： 669K
代理商： M37477E8SP
21
MITSUBISHI MICROCOMPUTERS
7477/ 7478 GROUP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
A-D CONVERTER
The A-D conversion uses an 8-bit successive comparison method.
Figure 13 shows a block diagram of the A-D conversion circuit.
Conversion is automatically carried out once started by the pro-
gram.
There are eight analog input pins which are shared with P20 to
P27 of port P2 (Only P20 to P23 4-bit for 7477 group).
Which analog inputs are to be A-D converted is specified by using
bit 2 to bit 0 in the A-D control register (address 00D916). Pins for
inputs to be A-D converted must be set for input by setting the di-
rection register bit to “0”. Bit 3 in the A-D control register is an A-D
conversion end bit. This is “0” during A-D conversion; it is set to “1“
when the conversion is terminated. Therefore, it is possible to
know whether A-D conversion is terminated by checking this bit.
Figure 14 shows the relationship between the contents of A-D
control register and the selected input pins.
Fig. 13 A-D converter circuit
The A-D conversion register (address 00DA16) contains informa-
tion on the results of conversion, so that it is possible to know the
results of conversion by reading the contents of this register.
The following explains the procedure to execute A-D conversion.
First, set values to bit 2 to bit 0 in the A-D control register to select
the pins that you want to execute A-D conversion. Next, clear the
A-D conversion end bit to “0”. When the above is done, A-D con-
version is initiated. The A-D conversion is completed after an
elapse of 50 machine cycles (12.5
s when f(XIN) = 8MHz), the A-
D conversion end bit is set to “1”, and the interrupt request bit is
set to “1”. The results of conversion are contained in the A-D con-
version register.
Comparator
A-D control circuit
Switch tree
Ladder resistor
A-D conversion
completion
interrupt request
VSS (Note 1)
VREF
1 : AVSS for M37478M4/M8/E8-XXXFP.
2 : The 7477 group does not have P2 4/IN4 to P27/IN7 pins.
P20/IN0
P21/IN1
P22/IN2
P23/IN3
P24/IN4
P25/IN5
P26/IN6
P27/IN7
Data bus
A-D control register
(address 00D916)
bit 3
Channel
selector
Notes
bit 0
A-D conversion register
(address 00DA16)
相關PDF資料
PDF描述
M37512F8H-XXXHP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
M37512FCH-XXXHP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
M37512F8HHP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
M37513M8-XXXHP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP100
M37513EFFS 8-BIT, UVPROM, 4 MHz, MICROCONTROLLER, CQCC100
相關代理商/技術參數
參數描述
M37477E8SP/FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37477E8TXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37477E8TXXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37477E8TXXXSP/FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37477E8-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*