參數資料
型號： M37470M8-XXXSP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
封裝： 0.400 INCH, 1.78 MM PITCH, PLASTIC, SDIP-32
文件頁數： 14/49頁
文件大小： 601K
代理商： M37470M8-XXXSP
18
7470/7471 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
Bit 4 determines if P17 is used as an output pin for the receive
ready signal (bit 4=“1”, SRDY) or used as a normal I/O pin (bit
4=“0”).
When the P17 pin is used as the SRDY output pin, output signal
can be selected between SRDY signal and SARDY signal by using
bit 5 in the serial I/O mode register. The SRDY signal is driven “L”
by a signal written into the serial I/O register to inform that the de-
vice is ready to receive. Then, the SRDY signal is driven “H” on the
first falling edge of the transfer clock.
The SARDY signal is driven “H” by a signal written into the serial
I/O register, and driven “L” on the last rising edge of the transfer
clock.
The function of serial I/O differs depending on the clock source;
external clock or internal clock.
Internal Clock – The serial I/O counter is set to 7 when data is
stored in the serial I/O register. At each falling edge of the transfer
clock, serial data is output to P15. During the rising edge of this
clock, data can be input from P14 and the data in the serial I/O
register will be shifted 1 bit. Data is output starting with the LSB.
After the transfer clock has counted 8 times, the serial I/O register
will be empty and the transfer clock will remain at a high level. At
this time the interrupt request bit will be set.
External Clock – If an external clock is used, the interrupt request
bit will be set after the transfer clock has counted 8 times but the
transfer clock will not stop. Due to this reason, the external clock
must be controlled from the outside.
Timing diagrams are shown in Figure 9.
Fig. 9 Serial I/O timing
D0
D1
D2
D3
D4
D5
D6
D7
Synchronous clock
Transfer clock
Serial I/O register write
signal
Serial I/O output
SOUT
Serial I/O input
SIN
Interrupt request bit set
Receive ready signal
SRDY
相關PDF資料
PDF描述
M37470E8-XXXSP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP32
M37470M2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37471E8-XXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP56
M37471M2-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37471M8-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
相關代理商/技術參數
參數描述
M37471E4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:8-BIT SINGLE-CHIP MICROCOMPUTER 740 FAMILY / 7470 SERIES
M37471E4-XXXSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37471E8SS 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37471E8-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37471E8-XXXSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*