參數資料
型號: M34512M2
廠商: Mitsubishi Electric Corporation
英文描述: SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
中文描述: 單芯片4位微機的CMOS
文件頁數: 41/80頁
文件大?。?/td> 760K
代理商: M34512M2
41
4512 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
PRELIMINARY
Notice: This is not a final specification.
change.
Some parametric limits are subject to
(4) Return signal
An external wakeup signal is used to return from the RAM back-up
mode because the oscillation is stopped. Table 19 shows the return
condition for each return source.
Table 19 Return source and return condition
Return source
Ports P0, P1
Remarks
Set the port using the key-on wakeup function selected with register K0 to
“H” level before going into the RAM back-up state because the port P0
shares the falling edge detection circuit with port P1.
Select the return level (“L” level or “H” level) with the bit 2 of register I1 ac-
cording to the external state before going into the RAM back-up state.
Select the return level (“L” level or “H” level) with the bit 2 of register I2 ac-
cording to the external state before going into the RAM back-up state.
Return condition
Return by an external falling
edge input (“H”
“L”).
Return by an external “H” level or
“L” level input.
The EXF0 flag is not set.
Return by an external “H” level or
“L” level input.
The EXF1 flag is not set.
E
s
INT0 pin
INT1 pin
Fig. 34 State transition
Fig. 35 Set source and clear source of the P flag
Fig. 36 Start condition identified example using the SNZP in-
struction
: Time required to stabilize the f(X
IN
) oscillation is automatically generated by hardware.
Stabilizing time a
POF instruction
is executed
A
f(X
IN
) oscillation
Return input
(Stabilizing time a )
B
(RAM back-up
mode)
f(X
IN
) stop
Reset
(Stabilizing time a )
Software start
P = “1”
Yes
Warm start
Cold start
No
(5) Ports P0 and P1 control registers
Key-on wakeup control register K0
Register K0 controls the ports P0 and P1 key-on wakeup func-
tion. Set the contents of this register through register A with the
TK0A instruction. In addition, the TAK0 instruction can be used to
transfer the contents of register K0 to register A.
Pull-up control register PU0
Register PU0 controls the ON/OFF of the ports P0 and P1 pull-
up transistor. Set the contents of this register through register A
with the TPU0A instruction. In addition, the TAPU0 instruction
can be used to transfer the contents of register PU0 to register A.
S
R
Q
Power down flag P
POF instruction
Reset input
G
Set source POF instruction is executed
G
Clear source Reset input
相關PDF資料
PDF描述
M34512M4 SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34514M8-756FP SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34513M2 Hook-Up Wire; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Color:White; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1061; CSA AWM; Conductor Material:Copper; Jacket Material:Polyvinylchloride (PVC) RoHS Compliant: Yes
M34513M2-420FP Hook-Up Wire; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Color:Black; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1061; CSA AWM; Conductor Material:Copper; Jacket Material:Polyvinylchloride (PVC) RoHS Compliant: Yes
M34513M4 Hook-Up Wire; Conductor Size AWG:26; No. Strands x Strand Size:7 x 34; Jacket Color:Dark Blue; Approval Bodies:UL, CSA; Approval Categories:UL AWM Style 1061; CSA AWM; Conductor Material:Copper RoHS Compliant: Yes
相關代理商/技術參數
參數描述
M34512M2-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34512M4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34512M4-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34513E4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34513E4FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER