參數資料
型號： M34508G4FP
元件分類： 微控制器/微處理器
英文描述： 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
封裝： 5.30 X12.60 MM, 1.27 MM PITCH, PLASTIC, SOP-20
文件頁數： 48/106頁
文件大小： 1059K
代理商： M34508G4FP
Rev.1.03
2009.07.27
page 44 of 140
REJ03B0148-0103
4508 Group
D7 D6 D5 D4 D3 D2 D1 D0
At transmit (D7–D0: transfer data)
At receive
D7 D6 D5 D4 D3 D2 D1 D0
SIN pin
SOUT pin
SIN pin
Serial interface register (SI)
D7 D6 D5 D4 D3 D2 D1 D0
*
D7 D6 D5 D4 D3 D2 D1
D7 D6 D5 D4 D3 D2
D0
D1 D0
Transfer data set
Transfer start
Transfer complete
*
** * * * * *
** * * ** **
** * * * * *
** ** **
Fig. 37 Serial interface register state when transferring
(1) Serial interface register SI
Serial interface register SI is the 8-bit data transfer serial/parallel
conversion register. Data can be set to register SI through registers
A and B with the TSIAB instruction. The contents of register A is
transmitted to the low-order 4 bits of register SI, and the contents
of register B is transmitted to the high-order 4 bits of register SI.
During transmission, each bit data is transmitted LSB first from the
lowermost bit (bit 0) of register SI, and during reception, each bit
data is received LSB first to register SI starting from the topmost bit
(bit 7).
When register SI is used as a work register without using serial in-
terface, do not select the SCK pin.
(2) Serial interface transmit/receive
completion flag (SIOF)
Serial interface transmit/receive completion flag (SIOF) is set to “1”
when serial data transmission or reception completes. The state of
SIOF flag can be examined with the skip instruction (SNZSI). Use
the interrupt control register V2 to select the interrupt or the skip
instruction.
The SIOF flag is cleared to “0” when the interrupt occurs or when
the next instruction is skipped with the skip instruction.
(3) Serial interface start instruction (SST)
When the SST instruction is executed, the SIOF flag is cleared to
“0” and then serial interface transmission/reception is started.
(4) Serial interface control register J1
Register J1 controls the synchronous clock, P02/SCK, P01/SOUT
and P00/SIN pin function. Set the contents of this register through
register A with the TJ1A instruction. The TAJ1 instruction can be
used to transfer the contents of register J1 to register A.
相關PDF資料
PDF描述
M34518M2-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32
M34518M4-XXXSP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP32
M34518E8FP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PQFP32
M34518M2-XXXSP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP32
M34518E8SP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDIP32
相關代理商/技術參數
參數描述
M34508G4GP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4GP#U0 功能描述:MCU 2/5V 4096 QZROM PB-FREE 20-S RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:720/4500 標準包裝:300 系列:78K0R/Ix3 核心處理器:78K/0R 芯體尺寸:16-位 速度:40MHz 連通性:3 線 SIO，I²C，LIN，UART/USART 外圍設備:DMA，LVD，POR，PWM，WDT 輸入/輸出數:27 程序存儲器容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:38-SSOP 包裝:托盤
M34508G4GP(#UO) 制造商:Renesas Electronics Corporation 功能描述:
M34508G4HFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4HGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*