參數資料
型號: M306NKFJTGP
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
封裝: 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件頁數: 58/84頁
文件大?。?/td> 586K
代理商: M306NKFJTGP
Rev.2.10
Aug 25, 2006
page 61 of 81
REJ03B0058-0210
M16C/6N Group (M16C/6NK, M16C/6NM)
5. Electric Characteristics (Normal-ver.)
Under development
This document is under development and its contents are subject to change.
td(BCLK-AD)
th(BCLK-AD)
th(RD-AD)
th(WR-AD)
td(BCLK-CS)
th(BCLK-CS)
td(BCLK-ALE)
th(BCLK-ALE)
td(BCLK-RD)
th(BCLK-RD)
td(BCLK-WR)
th(BCLK-WR)
td(BCLK-DB)
th(BCLK-DB)
td(DB-WR)
th(WR-DB)
td(BCLK-HLDA)
ns
Address output delay time
Address output hold time (in relation to BCLK)
Address output hold time (in relation to RD)
Address output hold time (in relation to WR)
Chip select output delay time
Chip select output hold time (in relation to BCLK)
ALE signal output delay time
ALE signal output hold time
RD signal output delay time
RD signal output hold time
WR signal output delay time
WR signal output hold time
Data output delay time (in relation to BCLK)
Data output hold time (in relation to BCLK)
(3)
Data output delay time (in relation to WR)
Data output hold time (in relation to WR)
(3)
__________
HLDA output delay time
Symbol
Parameter
Min.
Standard
Unit
Max.
4
0
(NOTE 1)
4
–4
0
4
(NOTE 2)
(NOTE 1)
Switching Characteristics
(Referenced to VCC = 3.3 V, VSS = 0 V, at Topr = –40 to 85 °C unless otherwise specified)
Table 5.44 Memory Expansion Mode and Microprocessor Mode (for 1- to 3-wait setting and external area access)
30
25
30
40
NOTES:
1. Calculated according to the BCLK frequency as follows:
0.5
109
f(BCLK)
– 10 [ns]
2. Calculated according to the BCLK frequency as follows:
(n – 0.5)
109
n is “1” for 1-wait setting, “2” for 2-wait setting and “3” for 3-wait setting.
f(BCLK)
– 40 [ns]
When n = 1, f(BCLK) is 12.5 MHz or less.
3. This standard value shows the timing when the
output is off, and does not show hold time of
data bus.
Hold time of data bus varies with capacitor volume
and pull-up (pull-down) resistance value.
Hold time of data bus is expressed in
t = – CR
ln (1 – VOL / VCC)
by a circuit of the right figure.
For example, when VOL = 0.2 VCC, C = 30 pF,
R =1 k
, hold time of output “L” level is
t = – 30 pF
1 k ln (1 – 0.2 VCC / VCC) = 6.7 ns.
DBi
R
C
Measuring
Condition
Figure 5.11
VCC = 3.3 V
相關PDF資料
PDF描述
M306NKMG-XXXGP 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
M306NMFHGP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP128
M306NKFHTGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306NKFJGP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
M306NMFJGP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP128
相關代理商/技術參數
參數描述
M306NKFJVGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Renesas MCU
M306NKFJVGP#U0 制造商:Renesas Electronics Corporation 功能描述:
M306NKME-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Renesas MCU
M306NKMG-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:Renesas MCU
M306NKT-EPB 功能描述:EMULATOR PROBE M16C/6N RoHS:否 類別:編程器,開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)