IGLOO DC and Switching Characteristics
2-12
Revision 23
Table 2-17 Summary of I/O Output Buffer Power (per pin) – Default I/O Software Settings1
Applicable to Standard Plus I/O Banks
CLOAD (pF)
VCCI (V)
Static Power
PDC7 (mW)2
Dynamic Power
PAC10 (W/MHz)3
Single-Ended
3.3 V LVTTL / 3.3 V LVCMOS
5
3.3
–
122.16
3.3V LVCMOS Wide Range4
5
3.3
–
122.16
2.5 V LVCMOS
5
2.5
–
68.37
1.8 V LVCMOS
5
1.8
–
34.53
1.5 V LVCMOS (JESD8-11)
5
1.5
–
23.66
1.2 V LVCMOS5
5
1.2
–
14.90
1.2 V LVCMOS Wide Range5
5
1.2
–
14.90
3.3 V PCI
10
3.3
–
181.06
3.3 V PCI-X
10
3.3
–
181.06
Notes:
1. Dynamic power consumption is given for standard load and software default drive strength and output slew.
2. PDC7 is the static power (where applicable) measured on VCCI.
3. PAC10 is the total dynamic power measured on VCCI.
4. All LVCMOS 3.3 V software macros support LVCMOS 3.3 V wide range as specified in the JESD-8B specification.
5. Applicable for IGLOO V2 devices only.
Table 2-18 Summary of I/O Output Buffer Power (per pin) – Default I/O Software Settings1
Applicable to Standard I/O Banks
CLOAD (pF)
VCCI (V)
Static Power
PDC7 (mW)2
Dynamic Power
PAC10 (W/MHz)3
Single-Ended
3.3 V LVTTL / 3.3 V LVCMOS
5
3.3
–
104.38
3.3V LVCMOS Wide Range4
5
3.3
–
104.38
2.5 V LVCMOS
5
2.5
–
59.86
1.8 V LVCMOS
5
1.8
–
31.26
1.5 V LVCMOS (JESD8-11)
5
1.5
–
21.96
1.2 V LVCMOS5
5
1.2
–
13.49
1.2 V LVCMOS Wide Range5
5
1.2
–
13.49
Notes:
1. Dynamic power consumption is given for standard load and software default drive strength and output slew.
2. PDC7 is the static power (where applicable) measured on VCCI.
3. PAC10 is the total dynamic power measured on VCCI.
4. All LVCMOS 3.3 V software macros support LVCMOS 3.3 V wide range as specified in the JESD-8B specification.
5. Applicable for IGLOO V2 devices only.