參數資料
型號: LWN1701-6EM1FK2G
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: DC-DC REG PWR SUPPLY MODULE
封裝: ROHS COMPLIANT
文件頁數: 23/28頁
文件大小: 1316K
代理商: LWN1701-6EM1FK2G
BCD20020-G REV AA
Page 4 of 28
www.power-one.com
W Series Data Sheet
125, 250 Watt AC-DC and DC-DC DIN-Rail Converters
Input
filter
Input
filter
V
o/Io control
Output
filter
2nd control loop (SELV)
Control circuit
including
PFC and
input OVP/UVP
L
N
Vo+
Vo–
C
y
C
y
C
y
C
Y
C
Y
AUX
Fuse
2nd fuse
(option F)
2
1
03103a
Shunt
3
4
5
8
9
2
3
6
7
1
11
10
Vo–
Vo+
Rectifier
+
Functional Description
The W Series converters are primary controlled AC-DC or DC-
DC flyback converters with a constant switching frequency of
130 kHz. The power-factor-corrected single-step conversion of
the input voltage to a low output voltage results in extremely
high efficiency. Depending upon the output power, the
converters are fitted with one (125 W) or two (250 W)
powertrains. Models with two powertrains have one or two
outputs. Double-output models exhibit indiviually regulated
powertrains.
The input voltage is fed via fuse, filter, and rectifier to the main
transformer, designed in planar technique. The input filter with
very small input capacitance generates virtually no inrush
current. An input transient suppressor protects the converter
against high voltage peaks and surges. Input over- and
undervoltage lockout as well as input current limitation protect
the converter from operation outside of its specification. The
input voltage waveform is sensed by the primary control logic
to allow active power factor correction, forcing the input current
to follow the input voltage waveform.
The secondary side of the main transformer supplies via the
rectifier diode a large electrolytic output storage capacitor
providing for the hold-up time. Double-output models exhibit
an individual control logic each. The output voltage and the
output current are measured and fed back to the primary
control logic via an optocoupler. A second control loop
monitors the output voltage. It disables the output in the case
of a failure in the control logic and limits the output voltage.
Built-in temperature sensors monitor the internal temperature
of each powertrain. If the temperature exceeds the limit, the
converter reduces the output power continuously to keep the
temperature below its limit. A green LED on the front cover
confirms the presence of the output voltage(s).
The R input (option R, M1, or M2) allows for external
adjustment of the output voltage by means of a resistor or an
external voltage source. An external sensor can be connected
to the R input and allows for temperature-controlled battery
charging (see Accessories).
Fig. 1
LWR 125 W and LWN 250 W single-output converters.
EWR and EWN models have a link (standard) or a decoupling diode (option Q)
rather than a bridge rectifier in the positive input line.
Product Marking
Basic type designation, applicable safety approval and
recognition marks, CE mark, warnings, pin designation,
Power-One company logo.
Specific type designation, input voltage range, nominal output
voltages and currents, degree of protection, batch no., serial
no., and data code including production site, version, and date
of production.
相關PDF資料
PDF描述
LWR1701-6ED1FK2G DC-DC REG PWR SUPPLY MODULE
LWR1801-6ERD2K2G DC-DC REG PWR SUPPLY MODULE
LWN2320-6EM2FK2G DC-DC REG PWR SUPPLY MODULE
LWR1601-6EM1FK2G DC-DC REG PWR SUPPLY MODULE
LWN2320-6ERD1M2FK2G 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
LWN1701-6ERK2 制造商:POWER-ONE INC 功能描述:AC-DC; DC-DC Converter; DIN Rail; 247W; 24.7V; 10A 制造商:Power-One 功能描述:ACDC - Bulk
LWN1701-6ERM1 制造商:Power-One 功能描述:ACDC - Bulk
LWN1701-6R 制造商:Power-One 功能描述:- Bulk
LWN1701-6RK2 制造商:Power-One 功能描述:ACDC - Bulk
LWN1740-6EM1 功能描述:DC/DC轉換器 DIN Rail 230W (51.36V) Battery Charger RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓(標稱): 輸出端數量:1 輸出電壓(通道 1):3.3 V 輸出電流(通道 1):600 mA 輸出電壓(通道 2): 輸出電流(通道 2): 安裝風格:SMD/SMT 封裝 / 箱體尺寸: