
GENERAL SPECIFICATIONS
Efficiency
LWM
80%, min.
WF
75%, min.
Switching frequency
LWM - fixed
75kHz typ.
WF - fixed
100kHz typ.
Case material
Black coated copper with
non-conductive base
Material flammability
UL94V-0
Weight
LWM
213g (7.5oz)
WF
99g (3.5oz)
MTBF
MIL-HDBK-217C
620,000 hours
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating amb.
–25°C to +71°C
Non-operating
–55°C to +105°C
Case
+95°C max.
Derating
None required
Cooling
Free air convection cooled
Relative humidity
Non-condensing
5% to 95% RH
OUTPUT SPECIFICATIONS
Voltage adjustability
LWM and WF
±10%
Remote sense
LWM
Yes
WF
No
Line regulation
LWM and WF
±0.5%, max.
Load regulation
LWM and WF, FL-NL
see table
Ripple and noise
LWM
60mV pk-pk,
15mV rms, max.
5Hz to 20MHZ
WF
40mV pk-pk,
10mV rms, max.
Transient response
LWM, 25% step
300
s recovery
change
to within 1.0%
WF, FL-L or L-FL
25mV peak,
50
s recovery
Temperature coefficient LWM
±0.02%/oC, max.
WF
±0.10%/°C, max.
Overvoltage protection
+5V output
6.8VDC ±10%
Short circuit protection
Output to common
Continuous
automatic recovery
INPUT SPECIFICATIONS
Input voltage range
LWM
7 to 40VDC
WF
7 to 32VDC
Input filter
LWM
Pi Network
See Note 6
WF
Low ESR cap
Remote ON/OFF
On LWM only
Logic compatibility
CMOS or open collector TTL
EC-ON
Min. 4.2VDC or open circuit
EC-OFF
3.5VDC
Control input resistance
100k
LWM and WF SERIES
Single output
[ 2 YEAR WARRANTY ]
2.0 x 2.0 x 0.38 inch package
Ultra wide input range
Six sided shield
Economically priced
Fixed 100kHz switching frequency (WF series)
Efficiencies to 80%
The WF12S05/1000Z is an un-isolated 5 Watt DC/DC converter. An ultra wide
input voltage range facilitates operation from 12VDC and 24VDC battery
sources. Its relatively low cost makes the WF a particularly cost effective
solution for low power applications where I/O isolation is not required. The WF
features external output voltage trim of ±10%, regulation less than 1%, over
voltage protection and a fixed switching frequency of 100kHz. The result is a
75% efficient converter in a package measuring 2 x 2 x 0.38 inches.
The
LWM12S05/5000XC has an output power capability of 25 Watts and is supplied
in a package measuring just 2.56 x 3 x 0.83 inches. Key features include an
ultra wide 7 to 40VDC input voltage range, fixed 75kHz switching frequency,
remote on/off, output sense and output trim to ±10% of nominal value.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
PAGE 1
Data Sheet Artesyn Technologies 2000
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.