
Ordering number : ENA1708
Bi-CMOS IC
For Brushless Motor Drive
Direct PWM Drive, Quiet Predriver IC
LV8130V
Overview
The LV8130V is a PWM drive pre-driver IC designed for three-phase brushless motors.
This IC reduces motor driving noise by imparting a slope to the phase switching current by quiet PWM drive, and realizes
high efficiency through the use of synchronous rectification.
A motor drive circuit with the desired output capability (voltage, current) can be implemented by adding discrete
transistors or other devices to the output. Furthermore, the LB8130V provides a full complement of protection circuits
allowing it to easily implement high-reliability drive circuits. This IC is optimal for driving various large-scale motors such
as those used in air conditioners and water heaters.
Features
Three-phase bipolar drive
Quiet PWM drive (150-degree current carrying + current feedback)
Synchronous rectification (with enable/disable select pin)
Speed control signal (supports either by analog voltage or PWM duty pulse input.)
Built-in forward/reverse switching circuit
Start/stop switching circuit (stop mode power save function)
Built-in current limiter circuit (Supports 0.25V (typical) reference voltage sensing based high-precision detection)
Built-in low-voltage protection circuit (The operating voltage can be set with a zener diode.)
Built-in automatic recovery type constraint protection circuit (ON:OFF = 1:15), with motor constraint protection
detection output (RD pin)
Selectable Hall signal pulse outputs (1-Hall FG or 3-Hall FG)
Supports thermistor based thermal protection of the output transistors.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'sproductsor
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
60910 SY PC 20100413-S00001 No.A1708-1/19