- 您現在的位置：買賣IC網 > PDF目錄9520 > LTC6905CS5#TRMPBF (Linear Technology)IC OSC SILICON 170MHZ TSOT23-5 PDF資料下載
參數資料
| 型號： | LTC6905CS5#TRMPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 12/12頁 |
| 文件大小： | 0K |
| 描述： | IC OSC SILICON 170MHZ TSOT23-5 |
| 產品目錄繪圖： | TSOT23-5 Series Top |
| 標準包裝： | 1 |
| 類型： | 振蕩器 - 硅 |
| 頻率： | 17MHz ~ 170MHz |
| 電源電壓： | 2.7 V ~ 5.5 V |
| 電流 - 電源： | 14mA |
| 工作溫度： | 0°C ~ 70°C |
| 封裝/外殼： | SOT-23-5 細型，TSOT-23-5 |
| 包裝： | 標準包裝 |
| 供應商設備封裝： | TSOT-23-5 |
| 安裝類型： | 表面貼裝 |
| 產品目錄頁面： | 1715 (CN2011-ZH PDF) |
| 其它名稱： | LTC6905CS5#TRMPBFDKR |
LTC6905
9
6905fd
APPLICATIONS INFORMATION
JITTER AND DIVIDE RATIO
At a given output frequency, a higher master oscillator
frequency and a higher divide ratio will result in lower
jitter and higher power supply dissipation. Indeterminate
jitter percentage will decrease by a factor of slightly less
than the square root of the divider ratio, while determinate
jitter will not be similarly attenuated. Please consult the
specication tables and Jitter vs Frequency graph showing
jitter at various divider ratios.
JITTER AND STRAY CAPACITANCE ON THE SET PIN
(PIN 3)
The stray capacitance on the SET pin (Pin 3) should be
limited to 10pF or less to avoid increased jitter or unstable
oscillation.
LTC6905 SUGGESTED CRITICAL COMPONENT LAYOUT
In order to provide the specied performance, it is re-
quired that the frequency setting resistor RSET and the
supply bypass capacitor be placed as close as possible
to the LTC6905. The following additional rules should be
followed for best performance:
1) The bypass capacitor must be placed as close as possible
to the LTC6905, and no vias should be placed between
the capacitor and the LTC6905. The bypass capacitor
must be on the same side of the circuit board as the
LTC6905.
2) The resistor RSET should be placed as close as possible
to the LTC6905, and the connection of RSET to VCC
should be closely shared with the bypass capacitor.
The resistor RSET may be placed on the opposite side
of the board from the LTC6905, directly underneath the
bypass capacitor.
3) If a ground plane is used, the connection of the LTC6905
to the ground plane should be as close as possible
to the LTC6905 GND pin and should be composed of
multiple, high current capacity vias.
LTC6905
6905 F02
C
R
Figure 2. LTC6905 Suggested Critical Component Layout
相關PDF資料 |
PDF描述 |
|---|---|
| VE-B11-IU-S | CONVERTER MOD DC/DC 12V 200W |
| VE-252-MY-S | CONVERTER MOD DC/DC 15V 50W |
| MS27505E25B2SA | CONN RCPT 100POS BOX MNT W/SCKT |
| VE-251-MY-S | CONVERTER MOD DC/DC 12V 50W |
| VI-B1V-IU-S | CONVERTER MOD DC/DC 5.8V 200W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC6905HS5 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:17MHz to 170MHz Resistor Set SOT-23 Oscillator |
| LTC6905HS5#PBF | 制造商:Linear Technology 功能描述:SC-Timing, Cut Tape 17MHz to 170MHz Resistor Programmable Oscillator |
| LTC6905HS5#TRMPBF | 功能描述:IC OSC SILICON 170MHZ TSOT23-5 RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 可編程計時器和振蕩器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:45 系列:- 類型:溫度 - 補償晶體振蕩器（TCXO） 計數:- 頻率:25MHz 電源電壓:3.135 V ~ 3.465 V 電流 - 電源:1.5mA 工作溫度:-40°C ~ 85°C 封裝/外殼:16-SOIC（0.295"，7.50mm 寬） 包裝:管件 供應商設備封裝:16-SOIC W 安裝類型:表面貼裝 |
| LTC6905HS5#TRPBF | 功能描述:IC OSC SILICON 170MHZ TSOT23-5 RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 可編程計時器和振蕩器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:45 系列:- 類型:溫度 - 補償晶體振蕩器（TCXO） 計數:- 頻率:25MHz 電源電壓:3.135 V ~ 3.465 V 電流 - 電源:1.5mA 工作溫度:-40°C ~ 85°C 封裝/外殼:16-SOIC（0.295"，7.50mm 寬） 包裝:管件 供應商設備封裝:16-SOIC W 安裝類型:表面貼裝 |
| LTC6905HS5-100 | 制造商:Linear Technology 功能描述:FIXED FREQUENCY SOT-23 OSCILLATOR |
發布緊急采購，3分鐘左右您將得到回復。