參數資料
型號: LTC6601CUF-1#TRPBF
廠商: Linear Technology
文件頁數: 25/40頁
文件大?。?/td> 0K
描述: IC DRVR FILTER/ADC LN 20-QFN
標準包裝: 2,500
頻率 - 截止或中心: 28Mhz
濾波器數: 3
濾波器階數: 2nd
電源電壓: 2.7 V ~ 5.25 V
安裝類型: 表面貼裝
封裝/外殼: 20-WFQFN 裸露焊盤
供應商設備封裝: 20-QFN 裸露焊盤(4x4)
包裝: 帶卷 (TR)
LTC6601-1
31
66011f
APPLICATIONS INFORMATION
COMPLEX FILTER CONFIGURATIONS
A Modied 2nd Order Lowpass Filter Topology
The basic lter topology of Figure 3 can be modied as
shown in Figure 13. The Figure 13 circuit includes an
impedance path between the two summing nodes (the
circuit nodes common to resistors R1, R2 and R3). A
resistor and/or a capacitor connection between the sum-
ming nodes provide even more exibility, and enhance
the lter design options (the fO and Q equations shown
in Figure 13 reduce to equations of Figure 3 if C3 is zero
and R4 is innite).
The modied second order lter topology provides for
setting the Q value (with R4) without changing the fO
value and increasing the passband gain to greater than
one without changing the Q value (in the Q equation of
Figure 13 the value of Q does not change if the value of
the [1 + GAIN + 2(R2/R4)] denominator factor does not
change). Using R4 to set the Q value allows the option
to design the –3dB frequency (f3dB). If the Q value varies
and the fO value is constant then the f3dB frequency var-
ies in a second order lowpass function (refer to the f3dB
equation of Figure 13).
Figure 14 shows three congurations using a capacitor
(C3) and a resistor (R4) between the summing nodes.
The external 49.9Ω resistor isolates the LTC6601 outputs
from driving directly a capacitive load. The three circuits
of Figure 14 have equal fO and Q values and differ only in
the passband gain. The 150Ω R4 resistor sets a Q value
equal to 0.54 for an f3dB = 5MHz for fO = 6.954MHz.
Figures 15 to 17 show additional circuits highlighting the
use of R4 in the modied second order cicuit to set the f3dB
frequency to 7.5MHz, 10MHz and 15MHz respectively.
The design procedure for a specied f3dB frequency is
as follows:
1 Using the chosen C1, C2 and C3 values calculate the
fO value.
2. Using fO of step 1 and the specied f3dB calculate the
Q value.
3. Calculate the R4 value using the Q value of step 3.
4. Calculate the required external resistor REXT value for
the R4 value in step 3. Example, in Figure 14 the Q
value for f3dB = 5MHz is 0.54, the required R4 resistor
is 350Ω, the R4A and R4B resistors are the internal
100Ω and the REXT resistor is 150Ω [REXT = R4 – (R4A
+ R4B)].
Note: The modied second order lter topology requires
the use of at least two of the three input resistor pairs (two
of the three 400Ω, 200Ω and 100Ω pairs).
相關PDF資料
PDF描述
LTC6601CUF-1#PBF IC DRVR FILTER/ADC LN 20-QFN
LT1568CGN#TRPBF IC BLOCK BUILD FLTR LONOS 16SSOP
LT1568CGN#TR IC BLOCK BUILD FLTR LONOS 16SSOP
LT1568CGN IC FILTER BUILDING BLOCK 16SSOP
LTC1565-31IS8#TRPBF IC FILTR 7TH ORDER 650KHZ 8-SOIC
相關代理商/技術參數
參數描述
LTC6601CUF-2 制造商:LINER 制造商全稱:Linear Technology 功能描述:Low Power, Low Distortion, 5MHz to 27MHz, Pin Confi gurable Filter/ADC Driver
LTC6601CUF-2#PBF 功能描述:IC DRVR FILTER/ADC LN 20-QFN RoHS:是 類別:集成電路 (IC) >> 接口 - 濾波器 - 有源 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1,000 系列:- 濾波器類型:連續時間,帶通低通 頻率 - 截止或中心:150kHz 濾波器數:4 濾波器階數:8th 電源電壓:4.74 V ~ 11 V,±2.37 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR)
LTC6601CUF-2#PBF 制造商:Linear Technology 功能描述:SC-Filters/Active RCLow Power Low Disto
LTC6601CUF-2#TRPBF 功能描述:IC FILTER/ADC DVR LP LD 20-QFN RoHS:是 類別:集成電路 (IC) >> 接口 - 濾波器 - 有源 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1,000 系列:- 濾波器類型:連續時間,帶通低通 頻率 - 截止或中心:150kHz 濾波器數:4 濾波器階數:8th 電源電壓:4.74 V ~ 11 V,±2.37 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:28-SOIC(0.295",7.50mm 寬) 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR)
LTC6601CUF-2PBF 制造商:LINER 制造商全稱:Linear Technology 功能描述:Low Power, Low Distortion, 5MHz to 27MHz, Pin Confi gurable Filter/ADC Driver