- 您現在的位置：買賣IC網 > PDF目錄224115 > LTC4050EMS-4.1#TRPBF (LINEAR TECHNOLOGY CORP) Lithium-Ion Linear Battery Charger Controller with Thermistor Interface; Package: MSOP; No of Pins: 10; Temperature Range: -40°C to +125°C PDF資料下載
參數資料
| 型號： | LTC4050EMS-4.1#TRPBF |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | 電源管理 |
| 英文描述： | Lithium-Ion Linear Battery Charger Controller with Thermistor Interface; Package: MSOP; No of Pins: 10; Temperature Range: -40°C to +125°C |
| 中文描述： | 2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 |
| 封裝： | PLASTIC, MSOP-10 |
| 文件頁數： | 8/12頁 |
| 文件大?。?/td> | 182K |
| 代理商： | LTC4050EMS-4.1#TRPBF |
5
LTC4050
4050f
PIN FUNCTIONS
UU
U
BAT (Pin 1): Battery Sense Input. A precision internal
resistor divider on this pin sets the final float voltage. The
resistor divider is disconnected in sleep mode to reduce
the current drain on the battery. A bypass capacitor of
10
F or more is required to keep the loop stable when the
battery is not connected.
NTC (Pin 2): Thermistor Interface Input. A 10k
Dale
Curve 2 NTC thermistor (or other 10k
NTC thermistor
with a room temperature beta of around 3400) is con-
nected from this pin to ground. The charge cycle will be
disabled and the timer will be placed on hold if the
thermistor temperature is above 50
°C or below 0°C.
CHRG (Pin 3): Charge Status Open-Drain Output. When
the battery is charging, the CHRG pin is pulled low by an
internal N-channel MOSFET. When the charge current
drops to 10% of the full-scale current for more than 15ms,
the N-channel MOSFET turns off and a 32
A current
source is connected from the CHRG pin to GND. When the
timer runs out or the input supply is removed, the current
source is disconnected and the CHRG pin becomes high
impedance.
TIMER (Pin 4): Timer Capacitor and Constant-Voltage
Mode Disable Input Pin. The timer period is set by placing
a capacitor, CTIMER, to GND. The timer period is tTIMER =
(CTIMER 3 hours)/(0.1F). Shorting the TIMER pin to
GND will disable the internal timer function and the C/10
function.
GND (Pin 5): Ground.
PROG (Pin 6): Charge Current Program and Shutdown
Input Pin. The charge current is programmed by connect-
ing a resistor, RPROG to ground. The charge current is IBAT
= (VPROG 800)/(RPROG RSENSE). The IC can be forced
into shutdown by floating the PROG pin and allowing the
internal 2.3
Acurrentsourcetopullthepinabovethe3.6V
shutdown threshold voltage.
DRV (Pin 7): Drive Output Pin for the P-Channel MOSFET
or PNP Transistor. The impedance is high at this pin,
therefore, if a PNP pass transistor is used, it must have
high gain.
VCC (Pin 8): Positive Input Supply Voltage. VCC can range
from 4.5V to 10V. Bypass this pin with a 1
F capacitor.
When VBAT is within 54mV of VCC, the LTC4050 is forced
into sleep mode, dropping ICC to 5A.
SENSE (Pin 9): Current Sense Input. A sense resistor,
RSENSE, must be connected from VCC to the SENSE pin.
Select a resistor value that will develop approximately
100mV at the programmed full-scale charge current.
This resistor is chosen using the following equation:
RSENSE = (VPROG 800)/(RPROG IBAT)
ACPR (Pin 10): Wall Adapter Present Output. When the
input voltage (wall adaptor) is applied to the LTC4050, this
pin is pulled to ground by an internal N-channel MOSFET
that is capable of sinking 5mA suitable for driving an
external LED.
相關PDF資料 |
PDF描述 |
|---|---|
| LTC4050EMS-4.2#PBF | Lithium-Ion Linear Battery Charger Controller with Thermistor Interface; Package: MSOP; No of Pins: 10; Temperature Range: -40°C to +125°C |
| LTC4052EMS8E-4.2#PBF | Lithium-Ion Battery Pulse Charger with Overcurrent Protection; Package: MSOP; No of Pins: 8; Temperature Range: -40°C to +125°C |
| LTC4052EMS8E-4.2#TRPBF | Lithium-Ion Battery Pulse Charger with Overcurrent Protection; Package: MSOP; No of Pins: 8; Temperature Range: -40°C to +125°C |
| LTC4053EDD-4.2#PBF | USB Compatible Lithium-Ion Battery Charger with Thermal Regulation; Package: DFN; No of Pins: 10; Temperature Range: -40°C to +125°C |
| LTC4053EMSE-4.2#PBF | USB Compatible Lithium-Ion Battery Charger with Thermal Regulation; Package: MSOP; No of Pins: 10; Temperature Range: -40°C to +125°C |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC4052 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:150mA Standalone Linear Li-Ion Battery Charger in ThinSOT |
| LTC4052-4.2 | 制造商:LINER 制造商全稱:Linear Technology 功能描述:Lithium-Ion Battery Pulse Charger with Overcurrent Protection |
| LTC4052-42 | 制造商:LINEAR 制造商全稱:LINEAR 功能描述:Lithium-Ion Battery Pulse Charger with Overcurrent Protection |
| LTC4052EMS8E-4.2 | 功能描述:IC CHARGER PULSE LI-ION 8-MSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 標準包裝:61 系列:- 功能:電源管理 電池化學:鋰離子（Li-Ion）、鋰聚合物（Li-Pol） 電源電壓:4.35 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:22-WFDFN 裸露焊盤 供應商設備封裝:22-DFN（6x3）裸露焊盤 包裝:管件 |
| LTC4052EMS8E-4.2#PBF | 功能描述:IC CHARGER PULSE LI-ION 8-MSOP RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 其它有關文件:STC3100 View All Specifications 特色產品:STC3100 - Battery Monitor IC 標準包裝:4,000 系列:- 功能:燃料，電量檢測計/監控器 電池化學:鋰離子（Li-Ion） 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-MiniSO 包裝:帶卷 (TR) 其它名稱:497-10526-2 |
發布緊急采購，3分鐘左右您將得到回復。