參數資料
型號： LTC2871IUHF#TRPBF
廠商： Linear Technology
文件頁數： 11/36頁
文件大?。?/td> 0K
描述： IC TXRX RS485/RS422 38-QFN
產品培訓模塊： LTC2870 and LTC2871 Multi-Protocol Transceivers
標準包裝： 2,500
類型： 收發器
驅動器/接收器數： 3/3
規程： RS232，RS422，RS485
電源電壓： 3 V ~ 5.5 V
安裝類型： 表面貼裝
封裝/外殼： 38-WFQFN 裸露焊盤
供應商設備封裝： 38-QFN（5x7）
包裝： 帶卷 (TR)
配用： DC1786A-ND - BOARD DEMO LTC2871
LTC2870/LTC2871
19
28701f
Overview
The LTC2870 and LTC2871 are flexible multiprotocol trans-
ceivers supporting RS485/RS422 and RS232 protocols.
These parts can be powered from a single 3V to 5.5V
supply with optional logic interface supply as low as 1.7V.
An integrated DC/DC converter provides the positive and
negative supply rails needed for RS232 operation. Auto-
matically selected integrated termination resistors for both
RS232 and RS485 protocols are included, eliminating the
need for external components and switching relays. Both
parts include loopback control for self-test and debug as
well as logically-switchable half- and full-duplex control
of the RS485 bus interface.
The LTC2870 offers a single port that can be configured
as either two RS232 receivers and drivers or one RS485/
RS422 receiver and driver depending on the state of the
485/232 pin. Control inputs DXEN and RXEN provide
independent control of driver and receiver operation for
either RS232 or RS485 transceivers, depending on the
selected operating protocol.
The LTC2871 separates the RS232 and RS485 transceivers
into independent I/Os allowing simultaneous operation
of two RS232 transceivers and one RS485 transceiver.
Independent control over driver and receiver mode for
each protocol is provided with logic inputs DX232, RX232,
DX485, RX485. Single channel RS232 operation is possible
via the CH2 control pin. The disabled channel maintains a
Hi-Z state on the receiver input and driver output, allowing
these lines to be shared with other transceivers.
Both parts feature rugged operation with ESD ratings
of ±26kV (LTC2870) and ±16kV (LTC2871) HBM on the
RS232 and RS485 receiver inputs and driver outputs, both
unpowered and powered. All other pins offer protection
exceeding ±4kV.
DC/DC Converter
The on-chip DC/DC converter operates from the VCC input,
generating a 7V VDD supply and a charge pumped –6.3V
VEE supply, as shown in Figure 13. VDD and VEE power
the output stage of the RS232 drivers and are regulated
to levels that guarantee greater than ±5V output swing.
The DC/DC converter requires a 10μH inductor (L1) and a
bypass capacitor (C4) of 2.2μF. The charge pump capacitor
(C1) is 220nF and the storage capacitors (C2 and C3) are
1μF. Larger storage capacitors up to 4.7μF may be used if
C1 and C4 are scaled proportionately. Locate C1–C4 close
to their associated pins.
Up to two LTC2870 or LTC2871 devices can be powered
from one of the devices; see Figure 48 in the Typical Ap-
plications section.
Inductor Selection
A 10μH inductor with a saturation current (ISAT) rating
of at least 220mA and a DCR (copper wire resistance) of
less than 1.3Ω is required. Some small inductors meeting
these requirements are listed in Table 12.
Table 12. Recommended Inductors
PART NUMBER
ISAT
(mA)
MAX
DCR (Ω)
SIZE(mm)
MANUFACTURER
LBC2016T100K
CBC2016T100M
245
380
1.07
2 × 1.6 × 1.6
Taiyo Yuden
www.t-yuden.com
FSLB2520-100K
220
1.1
2.5 × 2 × 1.6
Toko
www.tokoam.com
Capacitor Selection
The small size of ceramic capacitors makes them ideal
for the LTC2870 and LTC2871. Use X5R or X7R dielectric
types; their ESR is low and they retain their capacitance
over relatively wide voltage and temperature ranges. Use
a voltage rating of at least 10V.
APPLICATIONS INFORMATION
Figure 13. DC/DC Converter
28701 F13
3V TO 5.5V
C1
220nF
L1
10μH
C4
2.2μF
VCC
VDD
VEE
SW
CAP
C2
1μF
C3
1μF
PULSE-SKIPPING
BOOST
REGULATOR
f = 1.2MHz
相關PDF資料
PDF描述
LTC1345CSW#PBF IC TXRX V.35 SINGL SUPPLY 28SOIC
VI-B2R-MX-B1 CONVERTER MOD DC/DC 7.5V 75W
LTC1345CSW IC TXRX V.35 SINGL SUPPLY 28SOIC
MS27656T21F41SD CONN RCPT 41POS WALL MNT W/SCKT
VI-B30-MX-B1 CONVERTER MOD DC/DC 5V 75W
相關代理商/技術參數
參數描述
LTC2872CUHF#PBF 功能描述:IC LINEAR OP AMP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:* 產品培訓模塊:RS-232 & USB Transceiver 標準包裝:2,000 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:16-SSOP 包裝:帶卷 (TR) 其它名稱:296-19849-2
LTC2872CUHF#TRPBF 功能描述:IC LINEAR OP AMP RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:* 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC2872IUHF#PBF 功能描述:IC TRANSCEIVER RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:* 產品培訓模塊:RS-232 & USB Transceiver 標準包裝:2,000 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:16-SSOP 包裝:帶卷 (TR) 其它名稱:296-19849-2
LTC2872IUHF#TRPBF 功能描述:IC RS232 TRANSCEIVER RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:* 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
LTC2874IFE#PBF 制造商:Linear Technology 功能描述:IC CONTROLLER HOT SWAP 38TSSOP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*