參數資料
型號: LTC2482IDD#TRPBF
廠商: Linear Technology
文件頁數: 4/32頁
文件大?。?/td> 0K
描述: IC ADC 16BIT 10-DFN
標準包裝: 2,500
位數: 16
采樣率(每秒): 6.8
數據接口: MICROWIRE?,串行,SPI?
轉換器數目: 1
功率耗散(最大): 480µW
電壓電源: 單電源
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 10-WFDFN 裸露焊盤
供應商設備封裝: 10-DFN(3x3)
包裝: 帶卷 (TR)
輸入數目和類型: 1 個差分,雙極
配用: DC941A-ND - BOARD DELTA SIGMA ADC LTC2482
LTC2482
12
2482fc
APPLICATIONS INFORMATION
Bit 23 (rst output bit) is the end of conversion (EOC)
indicator. This bit is available at the SDO pin during the
conversion and sleep states whenever the CS pin is low.
This bit is high during the conversion and goes low when
the conversion is complete.
Bit 22 (second output bit) is a dummy bit (DMY) and is
always low.
Bit 21 (third output bit) is the conversion result sign
indicator (SIG). If VIN is >0, this bit is high. If VIN is <0,
this bit is low.
Bit 20 (fourth output bit) is the most signicant bit (MSB)
of the result. This bit in conjunction with Bit 21 also
provides the underrange or overrange indication. If both
Bit 21 and Bit 20 are high, the differential input voltage is
above +FS. If both Bit 21 and Bit 20 are low, the differential
input voltage is below –FS.
The function of these bits is summarized in Table 1.
Table 1. LTC2482 Status Bits
INPUT RANGE
BIT 23
EOC
BIT 22
DMY
BIT 21
SIG
BIT 20
MSB
VIN ≥ 0.5 VREF
0011
0V ≤ VIN < 0.5 VREF
0010
–0.5 VREF ≤ VIN < 0V
0001
VIN < –0.5 VREF
0000
Bits 20-4 are the 16-bit plus sign conversion result MSB
rst.
Bits 3-0 are always low and are included to maintain
software compatibility with the LTC2480.
Data is shifted out of the SDO pin under control of the
serial clock (SCK) (see Figure 2). Whenever CS is high,
SDO remains high impedance and any externally gener-
ated SCK clock pulses are ignored by the internal data
out shift register.
In order to shift the conversion result out of the device,
CS must rst be driven low. EOC is seen at the SDO pin
of the device once CS is pulled low. EOC changes in real
time from high to low at the completion of a conversion.
This signal may be used as an interrupt for an external
microcontroller. Bit 23 (EOC) can be captured on the rst
rising edge of SCK. Bit 22 is shifted out of the device on
the rst falling edge of SCK. The nal data bit (Bit 0) is
shifted out on the falling edge of the 23rd SCK and may
be latched on the rising edge of the 24th SCK pulse. On
the falling edge of the 24th SCK pulse, SDO goes high
indicating the initiation of a new conversion cycle. This
bit serves as EOC (Bit 23) for the next conversion cycle.
Table 2 summarizes the output data format.
As long as the voltage on the IN+ and INpins is main-
tained within the –0.3V to (VCC + 0.3V) absolute maximum
operating range, a conversion result is generated for any
differential input voltage VIN from –FS = –0.5 VREF to
+FS = 0.5 VREF. For differential input voltages greater
than +FS, the conversion result is clamped to the value
corresponding to the +FS + 1LSB. For differential input
voltages below –FS, the conversion result is clamped to
the value corresponding to –FS – 1LSB.
Table 2. LTC2482 Output Data Format
DIFFERENTIAL INPUT VOLTAGE
VIN*
BIT 23
EOC
BIT 22
DMY
BIT 21
SIG
BIT 20
MSB
BIT 19
BIT 18
BIT 17
BIT 4
BITS 3-0
VIN* ≥ FS**
0011000
0
FS** – 1LSB
0010111
1
0
0.5 FS**
0010100
0
0.5 FS** – 1LSB
0010011
1
0
0010000
0
–1LSB
0001111
1
0
–0.5 FS**
0001100
0
–0.5 FS** – 1LSB
0001011
1
0
–FS**
0001000
0
VIN* < –FS**
0000111
1
0
*The differential input voltage VIN = IN+ – IN. **The full-scale voltage FS = 0.5 VREF.
相關PDF資料
PDF描述
LTC2483IDD#TRPBF IC ADC 16BIT I2C 10-DFN
LTC2485CDD#TRPBF IC ADC 24BIT I2C 10-DFN
LTC2487CDE#PBF IC ADC 16BIT DELTA SIG 14-DFN
LTC2492IDE#TRPBF IC ADC 24BIT DELTA SIG 14-DFN
LTC2493IDE#TRPBF IC ADC 24BIT DELTA SIG 14-DFN
相關代理商/技術參數
參數描述
LTC2483CDD#PBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2483CDD#TRPBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2483IDD#PBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率(每秒):1M 數據接口:串行,SPI? 轉換器數目:1 功率耗散(最大):- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤(4x4) 包裝:Digi-Reel® 輸入數目和類型:8 個單端,單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2483IDD#TRPBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率(每秒):15 數據接口:MICROWIRE?,串行,SPI? 轉換器數目:1 功率耗散(最大):480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN(5x7) 包裝:帶卷 (TR) 輸入數目和類型:16 個單端,雙極;8 個差分,雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2484CDD 制造商:Linear Technology 功能描述:ADC Single Delta-Sigma 7.5sps 24-bit Serial 10-Pin DFN EP