- 您現在的位置：買賣IC網 > PDF目錄39420 > LTC2392CLX-16#PBF (LINEAR TECHNOLOGY CORP) SUCCESSIVE APPROXIMATION ADC, PQFP48 PDF資料下載
參數資料
| 型號： | LTC2392CLX-16#PBF |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | ADC |
| 英文描述： | SUCCESSIVE APPROXIMATION ADC, PQFP48 |
| 封裝： | 7 X 7 MM, LEAD FREE, PLASTIC, MS-026, QFN-48 |
| 文件頁數： | 7/24頁 |
| 文件大?。?/td> | 285K |
| 代理商： | LTC2392CLX-16#PBF |
LTC2392-16
239216f
applications inFormation
will finish and then the device will power down. The data
from that conversion can be read after PD = low is applied.
In this mode power consumption drops to a typical value
of 175W from 110mW. This mode can be used if the
LTC2392-16 is inactive for a long period of time and the
user wants to minimize the power dissipation.
Recovery from Power Shutdown Mode
Once the PD pin is returned to a low level, ending the
power shutdown request, the internal circuitry will begin
to power up. If the internal reference is used, the 2.6kΩ
output impedance with the 1F bypass capacitor on the
REFIN/REFOUT pins will be the main time constant for
the power-on recovery time. If an external reference is
used, typically allow 5ms for recovery before initiating a
new conversion.
Power Dissipation vs Sampling Frequency
The power dissipation of the LTC2392-16 will decrease
as the sampling frequency is reduced when nap mode
is activated. See Figure 7. In nap mode, a portion of the
circuitryontheLTC2392-16isturnedoffafteraconversion
has been completed. Increasing the time allowed between
conversions lowers the average power.
TIMING AND CONTROL
The LTC2392-16 conversion is controlled by CNVST. A
falling edge on CNVST will start a conversion. CS and RD
control the digital interface on the LTC2392-16. When
either CS or RD is high, the digital outputs are high
impedance.
CNVST Timing
The LTC2392-16 conversion is controlled by CNVST. A
falling edge on CNVST will start a conversion. Once a
conversion has been initiated, it cannot be restarted until
the conversion is complete. For optimum performance
CNVST should be a clean low jitter signal. Converter status
is indicated by the BUSY output which remains high while
the conversion is in progress. To ensure no errors occur
in the digitized results return the rising edge either within
40ns from the start of the conversion or wait until after
the conversion has been completed. The CNVST timing
needed to take advantage of the reduced power mode of
operation is described in the Nap Mode section.
Internal Conversion Clock
The LTC2392-16 has an internal clock that is trimmed
to achieve a maximum conversion time of 1300ns. No
external adjustments are required and with a maximum
acquisition time of 685ns, a throughput performance of
500ksps is guaranteed.
DIGITAL INTERFACE
The LTC2392-16 allows both parallel and serial digital
interfaces. The flexible OVP supply allows the LTC2392-16
to communicate with any digital logic operating between
1.8V and 5V, including 2.5V and 3.3V systems.
Figure 7. Power Dissipation of the LTC2392-16
Decreases with Decreasing Sampling Frequency
SAMPLING FREQUENCY (kHz)
10
POWER
SUPPL
YCURRENT
(mA)
20
30
5
15
25
0.1
10
100
1000
239216 G15
0
1
相關PDF資料 |
PDF描述 |
|---|---|
| LTC2392CUK-16#PBF | SUCCESSIVE APPROXIMATION ADC, PQCC48 |
| LTC2392CUK-16#TRPBF | SUCCESSIVE APPROXIMATION ADC, PQCC48 |
| LTC2392HLX-16#PBF | SUCCESSIVE APPROXIMATION ADC, PQFP48 |
| LTC2392ILX-16#PBF | SUCCESSIVE APPROXIMATION ADC, PQFP48 |
| LTC2392IUK-16#PBF | SUCCESSIVE APPROXIMATION ADC, PQCC48 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC2392CUK-16#PBF | 功能描述:IC ADC 16BIT SER/PAR 500K 48QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| LTC2392CUK-16#PBF | 制造商:Linear Technology 功能描述:ANALOG TO DIGITAL (A/D) CONVERTER IC |
| LTC2392CUK-16#TRPBF | 功能描述:IC ADC 16B SER/PAR 500K 48QFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC2392HLX-16#PBF | 功能描述:IC ADC 16B SER/PAR 500K 48LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
| LTC2392ILX-16#PBF | 功能描述:IC ADC 16B SER/PAR 500K 48LQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
發布緊急采購，3分鐘左右您將得到回復。