參數資料
型號： LTC2382IMS-16#PBF
廠商： LINEAR TECHNOLOGY CORP
元件分類： ADC
英文描述： 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
封裝： 4 X 5 MM, LEAD FREE, PLASTIC, MSOP-16
文件頁數： 3/24頁
文件大?。?/td> 1081K
代理商： LTC2382IMS-16#PBF
LTC2382-16
11
238216f
APPLICATIONS INFORMATION
Single-to-Differential Conversion
For single-ended input signals, a single-ended to differential
conversion circuit must be used to produce a differential
signal at the inputs of the LTC2382-16. The LT6350 ADC
driver is recommended for performing single-ended-to-
differential conversions.The LT6350 is flexible and may
be configured to convert single-ended signals of various
amplitudes to the ±2.5V differential input range of the
LTC2382-16. The LT6350 is also available in H-grade to
complement the extended temperature operation of the
LTC2382-16 up to 125°C.
Figure 5 shows the LT6350 being used to convert a 0V
to 2.5V single-ended input signal. In this case, the first
amplifier is configured as a unity gain buffer and the single-
ended input signal directly drives the high-impedance
input of the amplifier. As shown in the FFT of Figure 5a,
the LT6350 drives the LTC2382-16 to full datasheet
performance without degrading the SNR or THD.
The LT6350 can also be used to buffer and convert
single-ended signals larger than the input range of the
LTC2382-16 in order to maximize the signal swing that
can be digitized. Figure 6 shows the LT6350 converting a
0V-5V single-ended input signal to the ±2.5V differential
input range of the LTC2382-16. In this case, the first
amplifier in the LT6350 is configured as an inverting
amplifier stage, which acts to attenuate the input signal
down to the 0V-2.5V input range of the LTC2382-16. In the
inverting amplifier configuration, the single-ended input
signal source no longer directly drives a high impedance
input of the first amplifier. The input impedance is instead
set by resistor RIN. RIN must be chosen carefully based on
the source impedance of the signal source. Higher values
of RIN tend to degrade both the noise and distortion of
the LT6350 and LTC2382-16 as a system. R1, R2 and R3
must be selected in relation to RIN to achieve the desired
attenuation and to maintain a balanced input impedance
in the first amplifier. Table 1 shows the resulting SNR
and THD for several values of RIN, R1, R2 and R3 in this
configuration. Figure 6a shows the resulting FFT when
using the LT6350 as shown in Figure 6.
The LT6350 can also be used to buffer and convert large,
true bipolar signals which swing below ground to the ±2.5V
differential input range of the LTC2382-16. Figure 7 shows
the LT6350 being used to convert a ±10V true bipolar signal
for use by the LTC2382-16. The input impedance is again
set by resistor RIN. Table 2 shows the resulting SNR and
THD for several values of RIN. Figure 7a shows the resulting
FFT when using the LT6350 as shown in Figure 7.
LT6350
VCM = VREF/2
2.5V to
0V
0V to
2.5V
0V to 2.5V
238216 F05
OUT1
RINT
OUT2
8
4
5
2
1
+
–
+
–
+
FREQUENCY (kHz)
0
50
100
150
200
250
–180
AMPLITUDE
(dBFS)
–60
–40
–20
–80
–100
–120
–140
–160
0
238216 F05a
SNR = 92.2dB
THD = –106dB
SINAD = 92dB
SFDR = 107dB
Figure 5. LT6350 Converting a 0V-2.5V Single-Ended Signal
to a ±2.5V Differential Input Signal
Figure 5a.32k Point FFT Plot for Circuit Shown in Figure 5
相關PDF資料
PDF描述
LTC2382IMS-16#TRPBF 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
LTC2382CMS-16#PBF 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
LTC2382CMS-16#TRPBF 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
LTC2382IDE-16#TRPBF 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
LTC2382HMS-16#PBF 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16
相關代理商/技術參數
參數描述
LTC2383CDE-16#PBF 功能描述:IC ADC 16BIT 1CH 1MSPS 16-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極
LTC2383CDE-16#TRPBF 功能描述:IC ADC 16BIT 1CH 1MSPS 16-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極
LTC2383CDE-16PBF 制造商:Linear Technology 功能描述:ADC 16-Bit 1Msps Low Power SPI DFN16
LTC2383CMS-16#PBF 功能描述:IC ADC 16BIT 1CH 1MSPS 16MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率（每秒）:1M 數據接口:串行，SPI? 轉換器數目:1 功率耗散（最大）:- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤（4x4） 包裝:Digi-Reel® 輸入數目和類型:8 個單端，單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6
LTC2383CMS-16#TRPBF 功能描述:IC ADC 16BIT 1CH 1MSPS 16-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*