- 您現在的位置：買賣IC網 > PDF目錄10364 > LTC2360ITS8#TRMPBF (Linear Technology)IC ADC 12BIT 100KSPS TSOT23-8 PDF資料下載
參數資料
| 型號： | LTC2360ITS8#TRMPBF |
| 廠商： | Linear Technology |
| 文件頁數： | 9/20頁 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT 100KSPS TSOT23-8 |
| 標準包裝： | 1 |
| 位數： | 12 |
| 采樣率（每秒）： | 100k |
| 數據接口： | MICROWIRE?，串行，SPI? |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 3.6mW |
| 電壓電源： | 單電源 |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SOT-23-8 薄型，TSOT-23-8 |
| 供應商設備封裝： | TSOT-23-8 |
| 包裝： | 標準包裝 |
| 輸入數目和類型： | 1 個單端，單極 |
| 產品目錄頁面： | 1347 (CN2011-ZH PDF) |
| 其它名稱： | LTC2360ITS8#TRMPBFDKR |
LTC2360/LTC2361/LTC2362
17
236012fa
Input Filtering and Source Impedance
The noise and the distortion of the input amplier and
other circuitry must be considered since they will add to
the LTC2360/LTC2361/LTC2362 noise and distortion. The
small-signal bandwidth of the sample-and-hold circuit is
10MHz. Any noise or distortion products that are pres-
ent at the analog inputs will be summed over this entire
bandwidth. Noisy input circuitry should be ltered prior
to the analog inputs to minimize noise. A simple 1-pole
RC lter is sufcient for many applications. For example,
Figure 14 shows a 220pF capacitor from AIN to ground
and a 51
Ω source resistor to limit the input bandwidth
to 10MHz. The 220pF capacitor also acts as a charge
reservoir for the input sample-and-hold and isolates the
ADC input from sampling-glitch sensitive circuitry. High
quality capacitors and resistors should be used since these
components can add distortion. NPO and silvermica type
dielectric capacitors have excellent linearity. Carbon surface
mount resistors can generate distortion from self heating
and from damage that may occur during soldering. Metal
lm surface mount resistors are much less susceptible to
both problems. When high amplitude unwanted signals
are close in frequency to the desired signal frequency,
a multiple pole lter is required. High external source
resistance, combined with the 20pF of input capacitance,
will reduce the rated 10MHz bandwidth and increase
acquisition time beyond 500ns.
APPLICATIONS INFORMATION
Reference Input
On the TS8 package of the LTC2360/LTC2361/LTC2362,
the voltage on the VREF pin denes the full-scale range
of the ADC. The reference voltage can range from VDD
down to 1.4V.
Input Range
The analog input of the LTC2360/LTC2361/LTC2362 is
driven single-ended with respect to GND from a single
supply. The input may swing up to VDD for the S6 package
and to VREF for the TS8 package. The 0V to 2.5V range is
also ideally suited for single-ended input use with VDD or
VREF = 2.5V for single supply applications. If the difference
between the AIN input and GND exceeds VDD for the S6
package or VREF for the TS8 package, the output code will
stay xed at all ones, and if this difference goes below 0V,
the output code will stay xed at all zeros.
Figure 15 shows the ideal input/output characteristics for
the LTC2360/LTC2361/LTC2362. The code transitions oc-
cur midway between successive integer LSB values (i.e.,
0.5LSB, 1.5LSB, 2.5LSB, …, FS – 1.5LSB). The output
code is straight binary with 1LSB = VDD/4096 for the S6
package and 1LSB = VREF/4096 for the TS8 package.
VDD
GND
AIN
CONV
SDO
SCK
1
2
3
6
5
4
LTC2362
220pF
51Ω
2.2μF
236012 F14
Figure 14. RC Input Filter
INPUT VOLTAGE (V)
0
1LSB
UNIPOLAR
OUTPUT
CODE
111...111
111...110
236012 F15
000...001
000...000
FS – 1LSB
Figure 15. Transfer Characteristics
相關PDF資料 |
PDF描述 |
|---|---|
| D38999/24WE26SNLC | CONN HSG RCPT 26POS JAM NUT SCKT |
| D38999/24WE26BN | CONN HSG RCPT 26POS JAM NUT SCKT |
| LTC2361CS6#TRPBF | IC ADC 12BIT 250KSPS TSOT23-6 |
| D38999/20FC8SNLC | CONN HSG RCPT 8POS WALL MT SCKT |
| LTC2360HS6#TRMPBF | IC ADC 12BIT 100KSPS TSOT23-6 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC2361CS6#TRMPBF | 功能描述:IC ADC 12BIT 250KSPS TSOT23-6 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 位數:10 采樣率（每秒）:357k 數據接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 轉換器數目:1 功率耗散（最大）:830µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-TDFN-EP（3x3） 包裝:剪切帶 (CT) 輸入數目和類型:2 個單端，單極；2 個單端，雙極；1 個差分，單極；1 個差分，雙極 產品目錄頁面:1396 (CN2011-ZH PDF) 其它名稱:MAX1395ETB+TCT |
| LTC2361CS6#TRPBF | 功能描述:IC ADC 12BIT 250KSPS TSOT23-6 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2361CTS8#PBF | 制造商:Linear Technology 功能描述:ADC Single SAR 250ksps 12-bit Serial 8-Pin TSOT-23 |
| LTC2361CTS8#TRMPBF | 功能描述:IC ADC 12BIT 250KSPS TSOT23-8 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2361CTS8#TRPBF | 功能描述:IC ADC 12BIT 250KSPS TSOT23-8 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
發布緊急采購，3分鐘左右您將得到回復。