- 您現在的位置：買賣IC網 > PDF目錄39417 > LTC2356IMSE-12#TR (LINEAR TECHNOLOGY CORP) 1-CH 12-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 PDF資料下載
參數資料
| 型號： | LTC2356IMSE-12#TR |
| 廠商： | LINEAR TECHNOLOGY CORP |
| 元件分類： | ADC |
| 英文描述： | 1-CH 12-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 |
| 封裝： | PLASTIC, MSOP-10 |
| 文件頁數： | 3/16頁 |
| 文件大小： | 266K |
| 代理商： | LTC2356IMSE-12#TR |
第1頁第2頁當前第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁
11
LTC2356-12/LTC2356-14
2356f
INPUT FILTERING AND SOURCE IMPEDANCE
The noise and the distortion of the input amplifier and
other circuitry must be considered since they will add to
the LTC2356-12/LTC2356-14 noise and distortion. The
small-signal bandwidth of the sample-and-hold circuit is
50MHz. Any noise or distortion products that are present
at the analog inputs will be summed over this entire
bandwidth. Noisy input circuitry should be filtered prior to
the analog inputs to minimize noise. A simple 1-pole RC
filter is sufficient for many applications. For example,
Figure 1 shows a 47pF capacitor from AIN+ to ground and
a 51
source resistor to limit the input bandwidth to
47MHz. The 47pF capacitor also acts as a charge reservoir
for the input sample-and-hold and isolates the ADC input
from sampling-glitch sensitive circuitry. High quality ca-
pacitors and resistors should be used since these compo-
nents can add distortion. NPO and silvermica type dielectric
capacitors have excellent linearity. Carbon surface mount
resistors can generate distortion from self heating and
from damage that may occur during soldering. Metal film
surface mount resistors are much less susceptible to both
problems. When high amplitude unwanted signals are
close in frequency to the desired signal frequency, a
multiple pole filter is required. High external source resis-
tance, combined with the 13pF of input capacitance, will
reduce the rated 50MHz bandwidth and increase acquisi-
tion time beyond 39ns.
Figure 1. RC Input Filter
inverting input. The
±1.25V range is also ideally suited for
AC-coupled signals in single supply applications. Figure 2
shows how to AC couple signals in a single supply system
without needing a mid-supply 1.5V external reference. The
DC common mode level is supplied by the previous stage
that is already bounded by the single supply voltage of the
system. The common mode range of the inputs extend
from ground to the supply voltage VDD. If the difference
between the AIN+ and AIN– inputs exceeds 1.25V, the
output code will stay fixed at zero and all ones and if this
difference goes below –1.25V, the output code will stay
fixed at one and all zeros.
APPLICATIO S I FOR ATIO
WU
U
10
F
VCM
1.5V DC
11
3
AIN
–
LTC2356-12/
LTC2356-14
AIN
+
47pF
2
1
51
GND
VREF
2356 F01
+
AIN
+
C4
10
F
2356 F02
R2
1.6k
C2
1
F
C1
1
F
C1, C2: FILM TYPE
C3: COG TYPE
C4: CERAMIC BYPASS
R1
1.6k
1
2
3
LTC2356-12/
LTC2356-14
AIN
–
VREF
R3
51
C3
56pF
VIN
Figure 2. AC Coupling of AC Signals with 1kHz
Low Cutoff Frequency
INPUT RANGE
The analog inputs of the LTC2356-12/LTC2356-14 may be
driven fully differentially with a single supply. Each input
may swing up to 2.5VP-P individually. When using the
internal reference, the non-inverting input should never be
more than 1.25V more positive or more negative than the
INTERNAL REFERENCE
The LTC2356-12/LTC2356-14 has an on-chip, tempera-
ture compensated, bandgap reference that is factory
trimmed to 2.5V to obtain a bipolar
±1.25V input span. The
reference amplifier output VREF, (Pin 3) must be bypassed
with a capacitor to ground. The reference amplifier is
stable with capacitors of 1
F or greater. For the best noise
performance, a 10
Fceramicora10Ftantaluminparallel
with a 0.1
Fceramicisrecommended.TheVREFpincanbe
overdriven with an external reference as shown in
Figure 3. Overdriving VREF Pin with an External Reference
GND
LTC2356-12/
LTC2356-14
LT1790-3
VREF
10
F
3.5V TO 18V
11
3
3V
2356 F03
相關PDF資料 |
PDF描述 |
|---|---|
| LTC2356IMSE-14#TR | 1-CH 14-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 |
| LTC2356CMSE-14#TR | 1-CH 14-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 |
| LTC2356CMSE-14#TRPBF | 1-CH 14-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 |
| LTC2356IMSE-14#TRPBF | 1-CH 14-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO10 |
| LTC2376CDE-16#PBF | 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC2356IMSE-14 | 制造商:Linear Technology 功能描述:IC ADC 14BIT 3 WIRE SPI 3.5MSPS |
| LTC2356IMSE-14#PBF | 功能描述:IC ADC 14BIT 3.5MSPS 10-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率（每秒）:1M 數據接口:串行，SPI? 轉換器數目:1 功率耗散（最大）:- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤（4x4） 包裝:Digi-Reel® 輸入數目和類型:8 個單端，單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6 |
| LTC2356IMSE-14#TRPBF | 功能描述:IC ADC 14BIT 3.5MSPS 10-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率（每秒）:300k 數據接口:并聯 轉換器數目:1 功率耗散（最大）:75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端，單極；1 個單端，雙極 |
| LTC2360CS6#TRMPBF | 功能描述:IC ADC 12BIT 100KSPS TSOT23-6 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| LTC2360CS6#TRPBF | 功能描述:IC ADC 12BIT 100KSPS TSOT23-6 RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
發布緊急采購，3分鐘左右您將得到回復。