參數資料
型號: LTC1690IN8#PBF
廠商: Linear Technology
文件頁數: 11/12頁
文件大小: 0K
描述: IC RCVR/DVR PAIR LOW PWR 8-DIP
標準包裝: 50
類型: 驅動器
驅動器/接收器數: 1/1
規程: RS422,RS485
電源電壓: 4.75 V ~ 5.25 V
安裝類型: 通孔
封裝/外殼: 8-DIP(0.300",7.62mm)
供應商設備封裝: 8-PDIP
包裝: 管件
8
LTC1690
3
1
5
6
D
120
2
1
8
7
R
DRIVER
LTC1690
5V
LTC1690
RECEIVER
120
SHIELD
2
4
7
8
R
3
4
6
5
D
RECEIVER
DRIVER
1690 F06
SHIELD
0.01
F
5V
0.01
F
Figure 6. Typical Application
APPLICATIONS INFORMATION
WU
U
A typical application is shown in Figure 6. Two twisted pair
wires connect two driver/receiver pairs for full duplex data
transmission. Note that the driver and receiver outputs are
always enabled. If the outputs must be disabled, use the
LTC491. There are no restrictions on where the chips are
connected, and it isn’t necessary to have the chips con-
nected to the ends of the wire. However, the wires must be
terminated at the ends with a resistor equal to their
characteristic impedance, typically 120
. Because only
one driver can be connected on the bus, the cable need
only be terminated at the receiving end. The optional
shields around the twisted pair are connected to GND at
one end and help reduce unwanted noise.
The LTC1690 can be used as a line repeater as shown in
Figure 7. If the cable is longer that 4000 feet, the LTC1690
is inserted in the middle of the cable with the receiver
output connected back to the driver input.
Receiver Fail-Safe
Some encoding schemes require that the output of the
receiver maintains a known state (usually a logic 1) when
data transmission ends and all drivers on the line are
forced into three-state. The receiver of the LTC1690 has a
fail-safe feature which guarantees the output to be in a
logic 1 state when the receiver inputs are left floating or
shorted together. This is achieved without external com-
ponents by designing the trip-point of the LTC1690 to be
within – 200mV to –10mV. If the receiver output must be
a logic 0 instead of a logic 1, external components are
required.
The LTC1690 fail-safe receiver is designed to reject fast
–7V to 12V common mode steps at its inputs. The slew
rate that the receiver will reject is typically 400V/
s, but
–7V to 12V steps in 10ns can be tolerated if the frequency
of the common mode step is moderate (<600kHz).
Driver-Receiver Crosstalk
The driver outputs generate fast rise and fall times. If the
LTC1690 receiver inputs are not terminated and floating,
switching noise from the LTC1690 driver can couple into
the receiver inputs and cause the receiver output to glitch.
This can be prevented by ensuring that the receiver inputs
are terminated with a 100
or 120 resistor, depending
on the type of cable used. A cable capacitance that is
greater than 10pF (
≈1ft of cable) also prevents glitches if
no termination is present. The receiver inputs should not
be driven typically above 8MHz to prevent glitches.
相關PDF資料
PDF描述
VI-B5M-MY CONVERTER MOD DC/DC 10V 50W
IDT7201LA25P IC MEM FIFO 512X9 25NS 28-PDIP
VE-24K-IU-F2 CONVERTER MOD DC/DC 40V 200W
MS27473T16B99SA CONN PLUG 23POS STRAIGHT W/SCKT
LTC1606ISW IC ADC 16BIT 5V SAMPLING 28SOIC
相關代理商/技術參數
參數描述
LTC1690IS8 功能描述:IC RCVR/DVR PAIR LOW PWR 8-SOIC RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:121 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS422,RS485 電源電壓:3 V ~ 3.6 V 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-DFN(3x3) 包裝:管件
LTC1690IS8#PBF 功能描述:IC RCVR/DVR PAIR LOW PWR 8-SOIC RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:121 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS422,RS485 電源電壓:3 V ~ 3.6 V 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-DFN(3x3) 包裝:管件
LTC1690IS8#TR 功能描述:IC TXRX DIFF FAILSAFE LP 8SOIC RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:121 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS422,RS485 電源電壓:3 V ~ 3.6 V 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-DFN(3x3) 包裝:管件
LTC1690IS8#TRPBF 功能描述:IC RCVR/DVR PAIR LOW PWR 8-SOIC RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 標準包裝:121 系列:- 類型:收發器 驅動器/接收器數:1/1 規程:RS422,RS485 電源電壓:3 V ~ 3.6 V 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-DFN(3x3) 包裝:管件
LTC1690IS8PBF 制造商:Linear Technology 功能描述:Differential Driver/Receiver Pair SOIC8