- 您現在的位置：買賣IC網 > PDF目錄10294 > LTC1288CN8 (Linear Technology)IC A/D CONV SAMPLING 12BIT 8-DIP PDF資料下載
參數資料
| 型號： | LTC1288CN8 |
| 廠商： | Linear Technology |
| 文件頁數： | 9/24頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC A/D CONV SAMPLING 12BIT 8-DIP |
| 標準包裝： | 50 |
| 位數： | 12 |
| 采樣率（每秒）： | 6.6k |
| 數據接口： | MICROWIRE?，串行，SPI? |
| 轉換器數目： | 1 |
| 功率耗散（最大）： | 630µW |
| 電壓電源： | 單電源 |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 8-DIP（0.300"，7.62mm） |
| 供應商設備封裝： | 8-PDIP |
| 包裝： | 管件 |
| 輸入數目和類型： | 2 個單端，單極 |
17
LTC1285/LTC1288
APPLICATION INFORMATION
WU
U
Input Leakage Current
Input leakage currents can also create errors if the source
resistance gets too large. For instance, the maximum
input leakage specification of 1
A (at 125°C) flowing
through a source resistance of 240
will cause a voltage
drop of 240
V or 0.4LSB. This error will be much
reduced at lower temperatures because leakage drops
rapidly (see typical curve of Input Channel Leakage
Current vs Temperature).
REFERENCE INPUTS
The reference input of the LTC1285 is effectively a 50k
resistor from the time CS goes low to the end of the
conversion. The reference input becomes a high impedence
node at any other time (see Figure 10). Since the voltage
on the reference input defines the voltage span of the A/D
converter, the reference input should be driven by a
reference with low ROUT(ex. LT1004, LT1019 and LT1021)
or a voltage source with low ROUT.
selected “+” and “–” inputs once during each conversion
cycle. Large external source resistors and capacitances
will slow the settling of the inputs. It is important that the
overall RC time constants be short enough to allow the
analog inputs to completely settle within the allowed time.
LTC1285
REF+
ROUT
VREF
1
4
GND
LTC1285/88 F10
Figure 10. Reference Input Equivalent Circuit
Reduced Reference Operation
The minimum reference voltage of the LTC1288 is limited
to 2.7V because the VCC supply and reference are inter-
nally tied together. However, the LTC1285 can operate
with reference voltages below 1.5V.
The effective resolution of the LTC1285 can be increased
by reducing the input span of the converter. The LTC1285
exhibits good linearity and gain over a wide range of
reference voltages (see typical curves of Change in Linear-
ity vs Reference Voltage and Change in Gain vs Reference
RON = 500
CIN = 20pF
LTC1285
LTC1288
“+”
INPUT
RSOURCE
+
VIN +
C1
“–”
INPUT
RSOURCE
–
VIN –
C2
LTC1285/88 F08
Figure 8. Analog Input Equivalent Circuit
RC Input Filtering
It is possible to filter the inputs with an RC network as
shown in Figure 9. For large values of CF (e.g., 1F), the
capacitive input switching currents are averaged into a
net DC current. Therefore, a filter should be chosen with
a small resistor and large capacitor to prevent DC drops
across the resistor. The magnitude of the DC current is
approximately IDC = 20pF × VIN/tCYC and is roughly
proportional to VIN. When running at the minimum cycle
time of 133.3
s, the input current equals 0.375A at VIN
= 2.5V. In this case, a filter resistor of 160
will cause
0.1LSB of full-scale error. If a larger filter resistor must
be used, errors can be eliminated by increasing the cycle
time.
RFILTER
VIN
CFILTER
LTC1285/88 F09
LTC1285
“
+”
“
–”
IDC
Figure 9. RC Input Filtering
相關PDF資料 |
PDF描述 |
|---|---|
| VI-24X-CU-S | CONVERTER MOD DC/DC 5.2V 200W |
| D38999/20WJ43BN | CONN HSG RCPT 43POS WALL MT SCKT |
| D38999/20FJ20SNLC | CONN HSG RCPT 30POS WALL MT SCKT |
| VE-J3L-MX-S | CONVERTER MOD DC/DC 28V 75W |
| VI-240-CU-S | CONVERTER MOD DC/DC 5V 200W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTC1288CN8#PBF | 功能描述:IC A/D CONV SAMPLING 12BIT 8-DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| LTC1288CN8PBF | 制造商:Linear Technology 功能描述:LTC1288CN8PBF |
| LTC1288CS8 | 功能描述:IC A/D CONV SAMPLING 12BIT 8SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
| LTC1288CS8#PBF | 功能描述:IC A/D CONV SAMPLING 12BIT 8SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
| LTC1288CS8#TR | 功能描述:IC ADC 12BIT 3V SAMPLING 8SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
發布緊急采購，3分鐘左右您將得到回復。