參數資料
型號： LTC1199IMS8
廠商： Linear Technology
文件頁數： 7/28頁
文件大?。?/td> 0K
描述： IC ADC 10BIT 450KHZ W/SD 8-MSOP
標準包裝： 50
位數： 10
采樣率（每秒）： 450k
數據接口： MICROWIRE?，串行，SPI?
轉換器數目： 1
功率耗散（最大）： 25mW
電壓電源： 單電源
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 8-TSSOP，8-MSOP（0.118"，3.00mm 寬）
供應商設備封裝： 8-MSOP
包裝： 管件
輸入數目和類型： 1 個單端，單極
產品目錄頁面： 1345 (CN2011-ZH PDF)
15
LTC1197/LTC1197L
LTC1199/LTC1199L
Lower Supply Voltage
For lower supply voltages, LTC offers the LTC1197L/
LTC1199L. These pin compatible devices offer specified
performance to 2.7V supplies.
OPERATING ON OTHER THAN 5V SUPPLIES
The LTC1197 operates from 4V to 9V supplies and the
LTC1199 operates from 4V to 6V supplies. The LTC1197L/
LTC1199L operate from 2.7V to 4V supplies. To use these
parts at other than 5V supplies a few things must be kept
in mind.
Bypassing
At higher supply voltages, bypass capacitors on VCC and
VREF if applicable, need to be increased beyond what is
necessary for 5V. For a 9V supply a 10
F tantalum in
parallel with a 0.1
F ceramic is recommended.
Input Logic Levels
The input logic levels of CS, CLK and DIN are made to meet
TTL threshold levels on a 5V supply. When the supply
voltage varies, the input logic levels also change. For the
ADC to sample and convert correctly, the digital inputs
have to meet logic low and high levels relative to the
operating supply voltage (see typical curve of Digital Input
Logic Threshold vs Supply Voltage). If achieving mi-
cropower consumption is desirable, the digital inputs
must go rail-to-rail between VCC and ground (see ACHIEV-
ING MICROPOWER PERFORMANCE section).
Clock Frequency
The maximum recommended clock frequency is 7.2MHz
for the LTC1197/LTC1199 running off a 5V supply and
3.5MHz for the LTC1197L/LTC1199L running off a 2.7V
supply. With the supply voltage changing, the maximum
clock frequency for the devices also changes (see the
typical curve of Maximum Clock Rate vs Supply Voltage).
If the maximum clock frequency is used, care must be
taken to ensure that the device converts correctly.
that convert continuously, the LTC1197/LTC1197L/
LTC1199/LTC1199L will draw their normal operating power
continuously. Several things must be taken into account
to achieve micropower operation.
Shutdown
Figures 1 and 2 show the operating sequence of the
LTC1197/LTC1197L/LTC1199/LTC1199L. The converter
draws power when the CS pin is low and powers itself
down when that pin is high. If the CS pin is not taken all the
way to ground when it is low and not taken to VCC when it
is high, the input buffers of the converter will draw current.
This current may be tens of microamps. It is worthwhile to
bring the CS pin all the way to ground when it is low and
all the way to VCC when it is high to obtain the lowest
supply current.
When the CS pin is high (= supply voltage), the converter
is in shutdown mode and draws only leakage current. The
status of the DIN and CLK inputs have no effect on supply
current during this time. There is no need to stop DIN and
CLK with CS = high, except the MPU may benefit.
Minimize CS Low Time
In systems that have significant time between conver-
sions, lowest power drain will occur with the minimum CS
low time. Bringing CS low, transferring data as quickly as
possible, and then returning CS high will result in the
lowest possible current drain. This minimizes the amount
of time the device draws power. Even though the device
draws more power at high clock rates, the net power is less
because the device is on for a shorter time.
DOUT Loading
Capacitive loading on the digital output can increase
power consumption. A 100pF capacitor on the DOUT pin
can add 200
A to the supply current at a 7.2MHz clock
frequency. The extra 200
A goes into charging and dis-
charging the load capacitor. The same goes for digital lines
driven at a high frequency by any logic. The CV f currents
must be evaluated and the troublesome ones minimized.
APPLICATIO S I FOR ATIO
WU
UU
相關PDF資料
PDF描述
MS3100E20-11S CONN RCPT 13POS WALL MNT W/SCKT
MS27484T22B35SLC CONN HSG PLUG 100POS STRGHT SCKT
MS27466T17B8PA CONN RCPT 8POS WALL MT W/PINS
MS27656T15B97PA CONN RCPT 12POS WALL MNT W/PINS
MS27508E14F15SA CONN RCPT 15POS BOX MNT W/SCKT
相關代理商/技術參數
參數描述
LTC1199IMS8#PBF 功能描述:IC ADC 10BIT 450KHZ W/SD 8-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC1199IMS8#TR 功能描述:IC ADC 10BIT 450KHZ W/SD 8-MSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC1199IMS8#TRPBF 功能描述:IC ADC 10BIT 450KHZ W/SD 8-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC1199IS8 功能描述:IC ADC 10BIT 450KHZ W/SD 8-SOIC RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC1199IS8#PBF 功能描述:IC ADC 10BIT 450KHZ W/SD 8-SOIC RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*