參數資料
型號: LMZ1601-9PD1AHFU
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
封裝: 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE
文件頁數: 8/24頁
文件大?。?/td> 536K
代理商: LMZ1601-9PD1AHFU
Rugged Environment
DC-DC Converters <100 W
M-Family
Edition 2/96 - Melcher AG
7 - 17
MELCHER
The Power Partners.
7.1
Fig. 16
Typical inrush current waveform of a LM type
Fig. 15
Typical inrush current waveforms of a CM and an EM type
12
10
8
6
4
2
0
10
20
30
40
t [ms]
Ii [A]
t inr
CM type
Ui = 110 V DC
Po = Po nom
EM type
Ui = 110 V DC
Po = Po nom
Iinr p = Ui / (RS+RI)
Capacitor
Ci
fully charged
Normal operation
(FET fully conducting)
Ii = Po /Ui η
6
Ii [A]
4
2
0
-2
-4
-6
0
20
40
60
80
t [ms]
tinr
LM type
Ui = 230 V AC
Po = Po nom
Capacitor
Ci
fully charged
Normal operation
(FET fully conducting)
Precautions:
In order to avoid overload of the series resistor RI the on/off
switching cycle should be limited to 12 s if switched on/off
continuously. There should not be more than 10 start-up
cycles within 20 s at a case temperature of 25
°C.
If CM and CMZ types are driven by input voltages below
35 V DC or LM and LMZ types below 100 V AC, the maxi-
mum case temperature should be derated by 10 K or the to-
tal output power should be derated by 20%. EM, LM and
LMZ units driven by DC input voltages do not need to be
derated within the full specified input voltage range.
Availability:
Option E is available for C/E/LM and CMZ/LMZ modules
with a nominal output power of 51 W maximum.
Input
Filter
Control
Converter
FET
Ci
RI
RS
Rectifier
(LM/LMZ types)
Fig. 14
Option E block diagram
Table 18: Inrush current characteristics with option E
Characteristic
CM/CMZ
EM
LM/LMZ
Unit
CM/CMZ/EM at
Ui = 110 V DC
LM/LMZ at
Ui = 230 VAC
typ
max
typ
max
typ
max
Iinr p
Peak inrush current
6.5
8
2.2
4
6
10
A
tinr
Inrush current duration
22
30
19
30
35
50
ms
Option E Extended inrush current limitation
Available for C/E/LM and C/LMZ types.
The standard version of the modules C/D/E/LM as well as
C/D/LMZ include a passive inrush current limitation in the
form of a NTC resistor.
For applications which require an extended inrush current
limitation, an active electronic circuit as shown in "Option E
block diagram" has been developed. Typical inrush current
waveforms of units equipped with this option are shown
below.
CM and CMZ units meet the CEPT/ETSI standards for
48 V DC supply voltage according to prETS 300132-2 if fit-
ted with option E combined with option D6 (input voltage
monitoring). Option D6, externally adjustable via poten-
tiometer, is necessary to disable the converter at input volt-
ages below the actual service ranges, avoiding an exces-
sive input current when the input voltage is raised slowly
according to prETS 300132-2. Option D6 threshold level
Uti
+
Uhi (refer to description of option D) should be adjusted
to 36.0...40.5 V for 48 V DC nominal supply voltage (for 60
V DC systems, threshold should be set to 44.0...50.0 V
DC). The D output (pin 5) should be connected to the inhibit
(pin 2). For applications where potentiometers are not al-
lowed refer to option D9.
相關PDF資料
PDF描述
LMZ2540-9PD8AHFU 2-OUTPUT AC-DC REG PWR SUPPLY MODULE
LMZ3020-7EPD7AHFU 3-OUTPUT AC-DC REG PWR SUPPLY MODULE
LMZ3020-9EPD7AHFU 3-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1501-7RD3AHFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1601-7ERD9AHFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
LMZ1901-7R 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:50 Watt AC-DC Converters
LMZ20501EVM 功能描述:LMZ20501 SIMPLE SWITCHER? DC/DC, Step Down 1, Non-Isolated Outputs Evaluation Board 制造商:texas instruments 系列:SIMPLE SWITCHER? 零件狀態(tài):有效 主要用途:DC/DC,步降 輸出和類型:1,非隔離 功率 - 輸出:- 電壓 - 輸出:1.8V 電流 - 輸出:1A 電壓 - 輸入:2.7 V ~ 5.5 V 穩(wěn)壓器拓撲:降壓 頻率 - 開關:3MHz 板類型:完全填充 所含物品:板 使用的 IC/零件:LMZ20501 標準包裝:1
LMZ20501SILR 功能描述:DC/DC CONVERTER 0.8-3.6V 4W 制造商:texas instruments 系列:SIMPLE SWITCHER? Nano 包裝:剪切帶(CT) 零件狀態(tài):有效 類型:非隔離 PoL 模塊 輸出數:1 電壓 - 輸入(最小值):2.7V 電壓 - 輸入(最大值):5.5V 電壓 - 輸出 1:0.8 ~ 3.6 V 電壓 - 輸出 2:- 電壓 - 輸出 3:- 電流 - 輸出(最大值):1A 功率(W) - 制造系列:- 電壓 - 隔離:- 應用:ITE(商業(yè)) 特性:遠程開/關,OCP,OTP,SCP,UVLO 安裝類型:表面貼裝 封裝/外殼:8-SMD 模塊 大小/尺寸:0.14" 長 x 0.14" 寬 x 0.07" 高(3.5mm x 3.5mm x 1.8mm) 工作溫度:-40°C ~ 125°C 效率:93% 功率(W) - 最大值:4W 標準包裝:1
LMZ20501SILT 制造商:Texas Instruments 功能描述:
LMZ20502 制造商:TI 制造商全稱:Texas Instruments 功能描述:LMZ20502 2A SIMPLE SWITCHER Nano Module