
1A Low-Voltage Low-Dropout Regulator
LM39100/39101/39102
FEATURES
Fixed and adjustable output voltages to 1.24V
410mV typical dropout at 1A
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V or 1.5V conversion
1A minimum guaranteed output current
1% initial accuracy
Low ground current
Current limiting and thermal shutdown
Reversed-battery protection
Reversed-leakage protection
Fast transient response
Low-profile SOT-223 package
LM39100-X.X Fixed
APPLICATIONS
LDO linear regulator for PC add-in cards
PowerPC power supplies
High-efficiency linear power supplies
SMPS post regulator
Multimedia and PC processor supplies
Battery chargers
Low-voltage microcontrollers and digital logic
ORDERING INFORMATION
Device
LM39100- X.X
LM39101-X.X
LM39102-Adj
DESCRIPTION
The LM39100, LM39101, and LM39102 are 1A low-dropout linear voltage regulators that provide low-
voltage,high-current output from an extremely small package.
The LM39100/1/2 offers extremely low dropout (typically 410mVat 1A) and low ground current (typically
12mA at 1A).
The LM39100 is a fixed output regulator offered in theSOT-223 package. The LM39101 and LM39102 are
fixedand adjustable regulators, respectively, in a thermally en-hanced power 8-lead SOP (small outline
package).
The LM39100/1/2 is ideal for PC add-in cards that need toconvert from standard 5V to 3.3V, 3.3V to 2.5V
or 2.5V to1.8V. A guaranteed maximum dropout voltage of 630mV overall operating conditions allows the
LM39100/1/2 to provide2.5V from a supply as low as 3.13V and 1.8V from a supplyas low as 2.43V.
The LM39100/1/2 is fully protected with over current limiting,thermal shutdown, and reversed-battery
protection. Fixed voltages of 5.0V, 3.3V, 2.5V,1.8V and 1.5V are available on LM39100/1 with adjustable
output voltages to 1.24V on LM39102.
HTC
Connect to resitive voltage-divider network
Ground
Marking
LM39100-X.X
LM39101-X.X
LM39102-Adj
Package
SOT-223
SOP-8
SOP-8
PIN DESCRIPTION
Enable
(Input)
IN
CMOS-compatible control input.
Logic high = enable, logic
OUT
FLG
Regulator Output
ADJ
GND
Adjustment Input: Feedback input.
Connect to resitive voltage-divider network
1
Logic low or open = shutdown
Supply (Input)
Flag (Output): Open-collector error flag output.
SOT-223
SOP-8
* X.X = Fixed Vout = 1.5V, 1.8V, 2.5V, 3.3V, 5.0V