<pre id="1unq9"><fieldset id="1unq9"></fieldset></pre>
  • <small id="1unq9"><small id="1unq9"></small></small><thead id="1unq9"><label id="1unq9"></label></thead>
    • 參數資料
      型號: LK1601-7PD2
      廠商: POWER-ONE INC
      元件分類: 電源模塊
      英文描述: 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      封裝: HEAT SINK, METAL, CASE K02, MODULE
      文件頁數: 11/26頁
      文件大小: 1027K
      代理商: LK1601-7PD2
      Cassette Style
      AC-DC Converters
      K Series
      Edition 5/5.2000
      19/26
      Leakage Currents in AC-DC operation
      Leakage currents flow due to internal leakage capacitance
      and RFI suppression Y-capacitors. The current values are
      proportional to the mains voltage and nearly proportional to
      the mains frequency and are specified at an input voltage of
      264 V (50 Hz) where phase, neutral and protective earth
      are correctly connected as required for class I equipment.
      Under test conditions the leakage current flows through a
      measuring instrument (MI) as described in fig.:
      Measuring
      instrument for earth leakage current tests, which takes into
      account impedance and sensitivity of a person touching
      unearthed accessible parts. The current value is calculated
      by dividing the measured voltage by 500
      . If inputs and/or
      outputs of K-units are connected in parallel, their individual
      leakage currents are added.
      Fig. 25
      Measuring instrument (MI) for earth leaking current tests
      according to IEC/EN 60950.
      Fig. 26
      Test set-up
      V
      MI
      500
      1500
      10 k
      220 nF
      22 nF
      10061
      Vo+
      Vo–
      N
      P
      10064
      N
      P
      MI for
      earth
      leakage
      current
      Table 14: Leakage currents
      Characteristic
      Class I
      Unit
      LK 1000, LK 2000
      Maximum earth
      Permissible according to IEC/EN 60950
      3.5
      mA
      leakage current
      Specified value at 264 V, 50 Hz
      1.43
      Safety of operator accessible output circuit
      If the output circuit of an AC-DC converter is operator ac-
      cessible, it shall be an SELV circuit according to the IEC/EN
      60950 related safety standards.
      The following table shows a possible installation configura-
      tion, compliance with which causes the output circuit of an
      K series AC-DC converter to be an SELV circuit according
      to IEC/EN 60950 up to a configured output voltage (sum of
      nominal voltages if in series or +/– configuration) of 36 V.
      However, it is the sole responsibility of the installer to as-
      sure the compliance with the relevant and applicable safety
      regulations. More information is given in
      Technical Informa-
      tion: Safety.
      If the K series AC-DC converters are used as DC-DC con-
      verters, please refer to the data sheet
      DC-DC converters
      >100 W: K series.
      Table 15: Safety concept leading to an SELV output circuit
      Conditions
      AC-DC converter
      Installation
      Result
      Nominal voltage
      Grade of insulation
      Measures to achieve the resulting
      Safety status of the AC-DC
      between input and output
      safety status of the output circuit
      converter output circuit
      provided by the AC-DC converter
      Mains
      Double or reinforced
      Earthed case 1 and installation
      SELV circuit
      ≤250 V AC
      according to the applicable standards
      1 The earth connection has to be provided by the installer according to the relevant safety standards, e.g. IEC/EN 60950.
      AC-DC
      con-
      verter
      Mains
      SELV
      Earth connection
      +
      ~
      10021
      Fuse
      Fig. 27
      Schematic safety concept. Use fuses and earth connec-
      tion as per: Installation Instructions and table: Safety con-
      cept leading to an SELV output circuit.
      相關PDF資料
      PDF描述
      LK1601-9PD8T 1-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK2320-7B2 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK2320-7D7T 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK2320-7ED0B2 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      LK2320-7ED9B2 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE
      相關代理商/技術參數
      參數描述
      LK1601-7R 功能描述:線性和開關式電源 Euro-Cassette 150W (24V) RoHS:否 制造商:TDK-Lambda 產品:Switching Supplies 開放式框架/封閉式:Enclosed 輸出功率額定值:800 W 輸入電壓:85 VAC to 265 VAC 輸出端數量:1 輸出電壓(通道 1):20 V 輸出電流(通道 1):40 A 商用/醫用: 輸出電壓(通道 2): 輸出電流(通道 2): 安裝風格:Rack 長度: 寬度: 高度:
      LK1601-7R-B1 制造商:Power-One 功能描述:- Bulk
      LK1601-7RT 制造商:Power-One 功能描述:AC/DC Power Supply Single-OUT 24V 6A 150W
      LK1601-9ER 制造商:Power-One 功能描述:ACDC - Bulk
      LK1601-9ERD6TB1 制造商:Power-One 功能描述: