- 您現在的位置：買賣IC網 > PDF目錄358772 > LC9949G (Sanyo Electric Co.,Ltd.) 1/6 Optical Size EIA B/W Solid-State Image Sensor PDF資料下載
參數資料
| 型號： | LC9949G |
| 廠商： | Sanyo Electric Co.,Ltd. |
| 英文描述： | 1/6 Optical Size EIA B/W Solid-State Image Sensor |
| 中文描述： | 1 / 6光學尺寸環境影響評估/黑白固態圖像傳感器 |
| 文件頁數： | 9/10頁 |
| 文件大?。?/td> | 117K |
| 代理商： | LC9949G |
Notes on Mounting and Handling
1. Preventing Electrostatic Discharge (ESD)
Since CCD sensors are easily destroyed by ESD, the antistatic measures described below should be employed when
handling this device.
All tools and personnel must be grounded when handling CCDs. Note that a 1 M
resistor should be inserted in
series between personnel and ground for safety. (We recommend using wrist straps for personnel grounding.)
Personnel should handle CCD devices with either bare hands or antistatic gloves. Use antistatic materials for work
garments. Personnel should wear conductive shoes.
Lay conductive mats on the floor and benches in the workplace so that static charges do not accumulate.
We recommend using ionized air blowers (or other static removal techniques) when handling CCD sensors.
Use antistatic boxes when transporting boards that have CCD sensors mounted on them.
Do not leave packing materials or fittings made from plastic materials (such as Styrofoam) that easily collect static
charges on or near workplace tables.
Ground all tools, test equipment, conveyors, soldering irons, and other objects used in the workplace. Inspect
grounding regularly to assure that it is complete.
Do not handle this IC in the vicinity of TV monitors or other equipment that generates high static voltages. If
unavoidable, install antistatic filters in front of monitor screens and take all other possible antistatic measures.
Static charges accumulate easily in workplaces with a low relative humidity. Manufacturing operations should be
carried out in an environment with a relative humidity of at least 50%.
2. Soldering
The CCD package temperature must not exceed 80°C.
Since CCD sensors are sensitive to thermal stress as well as ESD, the soldering iron temperature should be under
300°C. Aim for a soldering time of 2 seconds per pin.
Use soldering irons that include an adjustable temperature control function that holds the soldering iron tip at a
constant temperature.
Be especially careful to assure that the device package temperature does not exceed 80°C when repairing or
redoing solder joints or when removing CCD sensors from printed circuit boards.
3. Soiling and Contamination Prevention
CCD sensors should be handled in a clean workplace. (A class 1000 level is appropriate.)
Do not touch the package surface and do not allow any object to contact the package surface. Use compressed air
to remove any foreign objects (such as dust) that land on the package surface. (We recommend using an ionized air
blower if possible.)
Use a cotton swab dipped in ethyl alcohol to remove oily contamination, being especially careful not to scratch the
package surface.
Use special-purpose cases to prevent soiling and contamination. Warm or cool CCD sensors in advance to prevent
condensation when transporting between rooms with radically differing temperatures.
For CCD sensors that are shipped with protective tape applied, only remove that tape immediately prior to use in
an environment in which ESD prevention measures have been fully implemented. Do not reuse protective tape that
has been removed from a CCD sensor.
4. Storage
Do not allow sunlight or other bright light to fall on CCD sensors for extended periods.
Since harsh conditions such as high temperatures or high humidities can adversely influence device characteristics,
do not use or store these devices in environments with such conditions. Samples should be stored in places where
the temperature and humidity fall in normal ranges, i.e., 5 to 35°C and 45 to 75% RH.
Since CCD sensors are precision optical components, they should not be subjected to mechanical shocks.
Avoid locations with corrosive atmospheres or high dust levels.
Avoid locations subject to rapid temperature changes.
Do not place heavy objects on top of boxes containing CCD sensors during storage.
Use materials that cannot accumulate static charges for containers used to hold samples.
Do not subject magazines holding CCD sensors to mechanical shocks, since this could adversely influence
reliability during mounting due to pin bending and other problems.
No. 5217-9/10
LC9949G
相關PDF資料 |
PDF描述 |
|---|---|
| LC9997 | 1/5 Inch Optical Size NTSC Color Solid-State Image Device |
| LC9997G | 1/5 Inch Optical Size NTSC Color Solid-State Image Device |
| LC9997M | 1/5-Inch Frame Transfer CCD NTSC Color Image Sensor |
| LC9998G | CONV DC-DC 48V IN 5/3.3V OUT 40W |
| LCA0309 | Carbon Film Resistors, Standard |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LC99501-RB5 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Video Camera Circuit |
| LC9965 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
| LC9967 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
| LC9997 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:1/5 Inch Optical Size NTSC Color Solid-State Image Device |
| LC9997G | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:1/5 Inch Optical Size NTSC Color Solid-State Image Device |
發布緊急采購，3分鐘左右您將得到回復。