參數資料
型號： LC7233N-8818
廠商： Sanyo Electric Co.,Ltd.
英文描述： Single-Chip PLL and Controller with LCD Driver(用于電子調諧的單片微控制器（帶LCD驅動器和鎖相環電路 ）)
中文描述： 單芯片PLL和控制器LCD驅動（用于電子調諧的單片微控制器（帶液晶顯示驅動器和鎖相環電路））
文件頁數： 22/36頁
文件大小： 598K
代理商： LC7233N-8818
13. LOUD/RMON
When pressed for less than 1.5 seconds:
Pressing this key turns on the LOUD display and sets the LOUD pin to the high level. Pressing the key again turns
off the LOUD display and sets the LOUD pin to the low level. This operation also turns on and off the loudness
function implemented in the LC7538JMD.
This operation is valid when HOLD is high and main power is on.
When pressed and held down for over 1.5 seconds:
1. When the diode matrix RMON FF/REW setting is 0:
This key operation has no effect. When the FF-REW pin goes high, regardless of the state of this key, the
LC7233N-8818 enters radio monitor mode temporarily. The RMON display flashes at a 1 Hz rate and radio
reception becomes possible.
2. When the diode matrix RMON FF/REW setting is 1:
When this key is pressed the RMON display lights. When the FF-REW pin goes high in this state, the
LC7233N-8818 enters radio monitor mode temporarily. The RMON display flashes at a 1 Hz rate and radio
reception becomes possible. Pressing this key again clears radio monitor mode and returns the LC7233N-8818
to the previous mode.
Operations 1 and 2 are both possible in VF mode even in the DK wait (standby) state.
This operation is valid when HOLD is high and main power is on.
14. POWER (when the diode matrix POWER SW setting is 1)
This key is used when the tact key in the key matrix controls the power. When this key is pressed the POWER pin
goes high and furthermore, the LC7233N-8818 switches to tape mode if there is tape input or to CD mode if CD is
on, i.e., if the CDIN pin is low.
15. MO/ST
When the LC7233N-8818 is in an FM radio mode (including VF mode), pressing this key turns on the ST display.
Pressing this key again turns off the ST display.
However, note that this operation is valid for both the FM and MW bands in products for the US and Japanese
markets when the diode matrix AM ST SEL setting is 1. This setting can be specified independently for the FM and
MW bands (but not for each of the FM1, FM2, FM3, MW1 and MW2 bands).
No. 4743-22/36
LC7233N-8818
Key
Display state
Output state
LOUD
LOUD
Lit
H
Off
L
Key
Display state
Output state
MO/ST
ST
Lit
L
Off
H
Key
Display State (setting state)
FF-REW
L
H
RMON
Lit (enabled)
Lit
Blinking at a 1 Hz rate
Off (disabled)
Off
RMON
相關PDF資料
PDF描述
LC7233N Single-Chip PLL and Microcontroller with LCD Driver
LC7233 Single-Chip PLL and Microcontroller with LCD Driver
LC72341G Low-Voltage Single-Chip Microcontrollers with On-Chip PLL and LCD Driver Circuits(用于音頻設備的低電壓單片微控制器（帶片上鎖相環電路和LCD驅動器）)
LC72345 Low-Voltage ETR Controller with On-Chip DC-DC Converter
LC72346 Ultralow-Voltage ETR Controller with On-Chip LCD Driver
相關代理商/技術參數
參數描述
LC7234 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Single-Chip PLL and Microcontroller with LCD Driver
LC72341 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Low-Voltage Single-Chip Microcontrollers with On- Chip PLL and LCD Driver Circuits
LC72341G 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Low-Voltage Single-Chip Microcontrollers with On- Chip PLL and LCD Driver Circuits
LC72341W 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Low-Voltage Single-Chip Microcontrollers with On- Chip PLL and LCD Driver Circuits
LC72342G 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Low-Voltage Single-Chip Microcontrollers with On- Chip PLL and LCD Driver Circuits
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*