- 您現在的位置：買賣IC網 > PDF目錄97997 > LC72144M (SANYO SEMICONDUCTOR CO LTD) PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 PDF資料下載
參數資料
| 型號： | LC72144M |
| 廠商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分類： | PLL合成/DDS/VCOs |
| 英文描述： | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 |
| 封裝： | MFP-24 |
| 文件頁數： | 19/22頁 |
| 文件大?。?/td> | 307K |
| 代理商： | LC72144M |
Pin Functions
No. 5377-6/22
LC72144M
Pin No.
Symbol
Type
Function
Pin circuit
24
1
16
15
2
4
3
5
17
19
9
8
23
12
14
13
XIN
XOUT
FMIN
AMIN
CE
CL
DI
DO
VDD
VSS
I/O-1
I/O-2
I/O-3
I/O-0
I/O-4
I/O-5
Xtal oscillator
Local oscillator
signal input
Local oscillator
signal input
Chip enable
Clock
Input data
Output data
Power supply
Ground
General-purpose
I/O ports
General-purpose
I/O ports
Crystal oscillator connection
(4.5, 7.2, 10.25, or 10.35 MHz)
FMIN is selected when DVS in the serial data input is set to 1.
The input frequency range is 10 to 160 MHz.
The signal is transmitted to the swallow counter.
The divisor can be set to a value in the range 272 to 65,535.
AMIN is selected when DVS in the serial data input is set to 0.
When SNS in the serial data input is set to 1:
The input frequency range is 2 to 40 MHz.
The signal is transmitted to the swallow counter.
The divisor can be set to a value in the range 272 to 65,535.
When SNS in the serial data input is set to 0:
The input frequency range is 0.5 to 10 MHz.
The signal is transmitted to the 12-bit programmable divider.
The divisor can be set to a value in the range 4 to 4,095.
This pin must be set high during serial data input (DI) to the
LC72144M, or during serial data output (DO).
Used for data synchronization during serial data input (DI) to
the LC72144M, or during serial data output (DO).
Used to input serial data transferred to the LC72144M from the
controller.
Used to output serial data transferred the controller from the
LC72144M.
The LC72144M power supply connection. Provide a voltage
between 4.5 and 5.5 V when the PLL circuit is in operation.
The power on reset circuit operates when power is first applied.
—
The LC72144M ground connection.
—
General-purpose I/O ports
The output circuits are open-drain circuits.
I/O-1 and I/O-2 are set to be input ports after the power on
reset. I/O-3 becomes an output port fixed at the low level.
These pins are switched between input and output by the I/O-1
to I/O-3 bits in the serial data transferred from the controller.
General-purpose I/O ports
The output circuits are complementary circuits.
These ports are set to be input ports after the power on reset.
These pins are switched between input and output by the I/O-0,
I/O-4, and I/O-5 bits in the serial data transferred from the
controller.
Continued on next page.
相關PDF資料 |
PDF描述 |
|---|---|
| LC72151V | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO30 |
| LC7216M | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO20 |
| LCP-10G3A4EDR | FIBER OPTIC TRANSCEIVER, 840-860nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| LCP-10G3A4EDRH | FIBER OPTIC TRANSCEIVER, 840-860nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| LCP-10G3B4QDR | FIBER OPTIC TRANSCEIVER, 1260-1355nm, 10000Mbps(Tx), 10000Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LC72146 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning |
| LC72146M | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:PLL Frequency Synthesizer for Electronic Tuning |
| LC72146MA-AH | 功能描述:時鐘合成器/抖動清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 輸出端數量: 輸出電平: 最大輸出頻率: 輸入電平: 最大輸入頻率:6.1 GHz 電源電壓-最大:3.3 V 電源電壓-最小:2.7 V 封裝 / 箱體:TSSOP-28 封裝:Reel |
| LC72146MHSQR-U-TRM-E | 制造商:Sony Semiconductor Solutions Division 功能描述: |
| LC72146V | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。