Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
'
s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'
s products or
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
31407 TI PC B8-6247, B8-6569 No.7894-1/9
LB8649W
Overview
The LB8649W integrates the actuator drivers required by digital cameras on a single chip.
Features
Integrates the actuator drivers required by digital cameras on a single chip.
1.
Shutter drive ("SH")
/AE system constant current output stepping motor or two VCM drivers
2. Zoom system constant voltage output stepping motor or DC motor driver (forward/reverse/brake)
3. AF system constant voltage output stepping motor driver
Zero standby mode current consumption (allows batteries to be connected directly)
Four independent power supply systems (SH/AE, AF, zoom, and input logic systems)
Low-voltage drive (allows operation from two NiMH batteries)
Built-in thermal protection circuit
Specifications
Absolute Maximum Ratings
at Ta = 25
°
C
Parameter
Symbol
Conditions
Ratings
Unit
VB max
VCC max
VIN max
VOUT max
IO max
Pd max
VB power supply
10.5
V
Maximum supply voltage
VCC power supply
10.5
V
Maximum input voltage
10.5
V
Maximum output voltage
10.5
V
Maximum output current
Per channel
600
mA
Allowable power dissipation
When mounted on a circuit board *1
1.0
W
Operating temperature
Topr
-20 to +80
°
C
Storage temperature
*1 Specified circuit board : 76.1
×
114.3
×
1.6mm
3
, glass epoxy.
Tstg
-55 to +150
°
C
Monolithic Digital IC
Digital Camera Motor Driver
Ordering number : EN7894B