參數資料
型號: LAN91C110
廠商: STANDARD MICROSYSTEMS CORP
元件分類: 微控制器/微處理器
英文描述: FEAST FAST ETHERNET CONTROLLER FOR PCMCIA AND GENERIC 16-BIT APPLICATIONS
中文描述: 1 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
封裝: 1 MM HEIGHT, TQFP-144
文件頁數: 45/55頁
文件大小: 482K
代理商: LAN91C110
FEAST Fast Ethernet Controller
for PCMCIA and Generic 16-Bit Applications
SMSC DS – LAN91C110 REV. B
Page 45
Rev. 09/05/02
In this case, the transmit interrupt service routine can find the next packet number to be serviced by reading the TX
FIFO PACKET NUMBER at the FIFO PORTS register. This eliminates the need for the driver to keep a list of packet
numbers being transmitted. The numbers are queued by the LAN91C110 and provided back to the CPU as their
transmission completes.
2. One interrupt per sequence of packets: Enable TX EMPTY INT and TX INT, set AUTO RELEASE=1. TX EMPTY
INT is generated only after transmitting the last packet in the FIFO.
TX INT will be set on a fatal transmit error allowing the CPU to know that the transmit process has stopped and
therefore the FIFO will not be emptied.
This mode has the advantage of a smaller CPU overhead, and faster memory de-allocation. Note that when AUTO
RELEASE=1 the CPU is not provided with the packet numbers that completed successfully.
Note
: The pointer register is shared by any process accessing the LAN91C110 memory. In order to allow processes
to be interruptable, the interrupting process is responsible for reading the pointer value before modifying it, saving it,
and restoring it before returning from the interrupt.
Typically there would be three processes using the pointer:
1. Transmit loading (sometimes interrupt driven)
2. Receive unloading (interrupt driven)
3. Transmit Status reading (interrupt driven).
1) and 3) also share the usage of the Packet Number Register. Therefore saving and restoring the PNR is also
required from interrupt service routines.
TX
FIFO
TX COFIFO
'NOT EMPTY'
RX
FIFO
CSMA/CD
LOGICAL
ADDRESS
PACKET #
MMU
PHYSICAL ADDRESS
RAM
CPU ADDRESS
CSMA ADDRESS
RX PACKET
NUMBER
RX FIFO
PACKET NUMBER
PACKET NUMBER
REGISTER
PACK # OUT
M.S. BIT ONLY
'EMPTY'
TX DONE
PACKET NUMBER
'NOT EMPTY'
INTERRUPT
STATUS REGISTER
RCV
INT
TX EMPTY
INT
TX
INT
ALLOC
INT
TWO
OPTIONS
FIGURE 12 - INTERRUPT GENERATION FOR TRANSMIT, RECEIVE, MMU
相關PDF資料
PDF描述
LAN91C96(100TQFP) LAN Node Controller
LAN91C96(100QFP) LAN Node Controller
LAN91C95 LAN Node Controller
LAN91C100FD(208TQFP) LAN Node Controller
LAN91C100FD(208PQFP) LAN Node Controller
相關代理商/技術參數
參數描述
LAN91C110-JD 制造商:SMSC 功能描述:
LAN91C110-PU 功能描述:以太網 IC Non-PCI 10/100 Ethernet MAC RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
LAN91C110TQFP 功能描述:以太網 IC Non-PCI 10/100 Ethernet MAC RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
LAN91C110-TQFP 制造商:SMSC 功能描述:
LAN91C111 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Non-PCI Ethernet Single Chip MAC + PHY