- 您現在的位置：買賣IC網 > PDF目錄358740 > LA9242M (Sanyo Electric Co.,Ltd.) Analog Signal Processor ASP for CD Players PDF資料下載
參數資料
| 型號： | LA9242M |
| 廠商： | Sanyo Electric Co.,Ltd. |
| 英文描述： | Analog Signal Processor ASP for CD Players |
| 中文描述： | 模擬信號處理器的ASP CD播放機 |
| 文件頁數： | 8/20頁 |
| 文件大?。?/td> | 150K |
| 代理商： | LA9242M |
LA9242M
No.7097–8/20
6. Sled servo
The response characteristics are set by SLEQ (pin 28). The amplifier positioned after SLEQ (pin 28) has a mute
function that is applied when the SLED OFF command is issued. The sled is moved by inputting current to SL
–
(pin 30) and SL
+
(pin 31) ; specifically, the pins are connected to the microprocessor output ports via resistors, and
the movement gain is set by the resistance value of that resistor. It is important to note that if there is a deviation in
the resistance values for SL
–
(pin 30) and SL
+
(pin 31), an offset will arise in the SLD output.
7. Spindle servo
This configures the servo circuit, which maintains the linear velocity of the disc at a constant speed, along with the
DSP. This circuit accepts signals from the DSP through CV
–
(pin 39) and CV
+
(pin 40) and sets the equalizer
characteristics through SP (pin 24), SP
–
(pin26), and SPD (pin 27), which are output to SPD (pin 27). The 12-cm
mode amplifier gain is set by the resistor connected between SPG (pin 25) and the reference voltage. In 8-cm
mode, this amplifier serves as an internal buffer, and SPG (pin 25) is ignored. Note that the gain setting is made for
8-cm mode first, and then 12-cm mode. If SPG (pin 25) is left open, the gain is forcibly set for 8-cm mode, regard-
less of whether 8-cm or 12-cm mode is in effect.
8. TES and HFL (traverse signals)
When moving the pickup from the outer track to the inner track, the EF output from the pickup must be connected
so that the phase relationship of TES and HFL is as shown in the diagram below. For the TESI input, the TES
comparator has negative polarity and hysteresis of approximately
±
100mV. An external bandpass filter is needed in
order to extract only the required signal from the TE signal.
9. DRF (luminous energy determination)
DRF goes high when the peak of the EFM signal (RFSM output) held by the PH1 (pin 60) capacitor exceeds
approximately 2.3V. The PH1 (pin 60) capacitor affects the DRF detection time constant and the RFAGC response
bidirectional setting. The DRF output is driven by a constant current (250
μ
A).
10.Focus determination
Focus is assumed to be obtained when the focus error signal S curve reaching REF +0.2V is detected, and the S
curve subsequently returns to REF.
RFSM
DRF
RFSM
FE
Pickup position
HFL
TES
TE
3.0V
2.1V
1.5V
Focus
3.0V
2.3V
1.5V
Focus
REF+0.2V
相關PDF資料 |
PDF描述 |
|---|---|
| LA9250M | CD Player Analog Signal Processor (ASP)(用于CD播放器的模擬信號處理器) |
| LA9251M | CD Player Analog Signal Processor (ASP)(用于CD播放器的模擬信號處理器) |
| LA9410 | Final Audio Output IC for LD Players |
| LA9450CL | Bi-CMOS IC For Laser Diode For Laser Diode |
| LA9511W | AV Remote Coupler Transmitter(AV遠距離耦合發送器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LA9247T | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:CD-ROM Digital Servo RF IC |
| LA9250M | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:CD Player Analog Signal Processor (ASP) |
| LA9251 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:CD Player Analog Signal Processor (ASP) |
| LA9251M | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:CD Player Analog Signal Processor (ASP) |
| LA92B-2EG-1 | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
發布緊急采購，3分鐘左右您將得到回復。