- 您現在的位置：買賣IC網 > PDF目錄30727 > LA8662V SPECIALTY CONSUMER CIRCUIT, PDSO16 PDF資料下載
參數資料
| 型號： | LA8662V |
| 元件分類： | 消費家電 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PDSO16 |
| 封裝： | 0.225 INCH, SSOP-16 |
| 文件頁數： | 6/6頁 |
| 文件大?。?/td> | 376K |
| 代理商： | LA8662V |
LA75501V
No.A0224-6/10
Test Conditions
V1. Circuit current [I21]
(1) External AGC (V18 = 1.5V)
(2) RF AGC VR MAX
(3) Connect an ammeter to the VCC and measure the incoming current to pin 17.
V2. V3. Maximum RF AGC voltage, Minimum RF AGC voltage [V17H, V17L]
(1) Internal AGC
(2) Input a 38.9MHz, 10mVrms, continuous wave to the VIF input pin.
(3) Adjust the RF AGC VR (resistance max.) and measure the maximum RF AGC voltage.
(4) Adjust the RF AGC VR (resistance min.) and measure the minimum RF AGC voltage.
(3), (4) Measuring point F
V4. Input sensitivity [Vi]
(1) Internal AGC
(2) fp = 38.9MHz 400Hz 40% AM (VIF input)
(3) Turn off the SW1 and put 100k
through.
(4) Measure the VIF input level at which the 400Hz detection output level at test point A becomes 0.7Vp-p.
V5.
AGC range [GR]
(1) Apply the VCC voltage to the external AGC, If AGC (pin 18).
(2) In the same manner under the same conditions as for V4 (input sensitivity), measure the VIF input level at which
the detection output level becomes 0.7Vp-p. Vil *Vi: Input sensitivity
(3) GR = 20log
dB
V6. Maximum allowable input [Vi max]
(1) Internal AGC
(2) fp = 38.9MHz 15kHz 78% AM (VIF input)
(3) VIF input level at which the detection output level at test point A becomes video output (VO) ±1dB.
V7. No-signal video output voltage [V6]
(1) Apply the VCC voltage to the external AGC, IF AGC (pin 18).
(2) Measure the DC voltage of VIDEO output (A).
V8. Sync. signal tip voltage [V6tip]
(1) Internal AGC
(2) Input a 38.9MHz, 10mVrms, continuous wave to the VIF input pin.
(3) Measure the DC voltage of VIDEO output (A).
V9. Video output level [VO]
(1) Internal AGC
(2) fp = 38.9MHz 15kHz 78% AM
Vi = 10mVrms (VIF input)
(3) Measure the peak value of the detection output level at test point A. (Vp-p)
V10. Video S/N [S/N]
(1) Internal AGC
(2) fp = 38.9MHz CW = 10mVrms (VIF input)
(3) Measure the noise voltage at test point A in RMS volts through a 10kHz to 4MHz band-pass filter.
Noise voltage (N)
(4) S/N = 20log
= 20log
(dB)
Vil
Vi
Video voltage (Vp-p)
N (Vrms)
1.12Vp-p
N(Vrms)
相關PDF資料 |
PDF描述 |
|---|---|
| LA8670M | FM, AUDIO DEMODULATOR, PDSO24 |
| LA9200NM | SPECIALTY CONSUMER CIRCUIT, PQFP48 |
| LA9201M | SPECIALTY CONSUMER CIRCUIT, PQFP48 |
| LA9210M | SPECIALTY CONSUMER CIRCUIT, PQFP80 |
| LA9215 | SPECIALTY CONSUMER CIRCUIT, PDIP24 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LA8670M | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Double-Conversion Narrow-Band FM IF System |
| LA8677V | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:LA8677V |
| LA8797BH | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller |
| LA87W-DBK-S1 | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
| LA87W-G | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
發布緊急采購，3分鐘左右您將得到回復。