N1506 MS PC B8-6591, B8-6996 No.7868-1/10
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
LA75676VA
Overview
The LA75676VA is a VIF/SIF IC that supports NTSC intercarrier reception and adopts a semi-adjustment-free design. It is
provided in the SSOP24 (225mil, 0.5mm lead pitch) package, which is appropriate for miniature 2-in-1 tuner products. In
the VIF block, it adopts a design that uses AFT adjustment to obviate the need for VCO adjustment, and thus can simplify
the adjustment steps required in end product manufacturing. It uses a PLL technique for FM detection. It features the 5V
supply voltage appropriate for multimedia products. In addition, it achieves superb audio quality by incorporating a buzz
canceller that suppresses Nyquist buzzing.
Functions
VIF block: VIF amplifier, buzz canceller, PLL detector, IF AGC, RF AGC, AFT, and an equalizer amplifier
SIF block: Limiter amplifier, PLL FM detector
Specifications
Maximum Ratings at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
6V
Circuit voltage
V13, V17
VCC
V
I6
-3
mA
I10
-10
mA
Circuit current
I24
-2
mA
Allowable power dissipation
Pd max
Ta
≤ 70°C * Mounted on a board
600
mW
Operating temperature
Topr
-20 to +70
°C
Storage temperature
Tstg
-55 to +150
°C
* When mounted on a 114.3×76.1×1.6mm3 glass epoxy board.
Operating Conditions at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
Unit
Recommended supply voltage
VCC
5V
Operating supply voltage range
VCC op
4.5 to 5.5
V
Monolithic Linear IC
IF Signal Processor (VIF+SIF)
for TV and VCR Products
Ordering number : EN7868