2.3 W 2-Channel AF Power Amplifier for Radio
Cassette Players
Features
.
Built-in 2 channels enabling use in stereo and bridge
amplifier (BTL) applications.
.
High-output:
2.3 W typ./channel, V
CC
= 9 V, R
L
= 4
4.7 W typ./bridge amplifier, V
CC
= 9 V, R
L
= 8
.
Low switching distortion at high frequencies.
.
Minimum number of external parts required: 9 pcs. min.
(Stereo/bridge).
.
Small shock noise at the time of power supply ON/OFF due
to built-in muting circuit.
.
Good ripple rejection due to built-in ripple filter.
.
Soft tone at the time of output saturation.
.
Good channel separation.
.
Voltage gain fixed at 45 dB (Bridge: 51 dB).
Variable voltage gain available with external resistor added.
Package Dimensions
unit : mm
3022A-DIP12F
[LA4183]
SANYO : DIP12F
Note:
In general applications, heat generated in the DIP 12-pin
package can be radiated through the Cu-foiled area of the
printed circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load conditions,
it is recommended to use a fin additionally.
Specifications
Maximum Ratings
at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
V
Maximum supply voltage
V
CC
max
With signal
Quiescent
With printed circuit board
(Refer to Pd – Ta characteristics)
11
15
Allowable power dissipation
Pd max
4
W
Operating temperature
Storage temperature
Topr
Tstg
–20 to +75
–55 to +150
°C
°C
Operating Conditions
at Ta = 25°C
Parameter
Symbol
V
CC
Conditions
Ratings
Unit
V
Recommended supply voltage
9.0
Load resistance
R
L
Stereo
Bridge
4.0 to 8.0
8.0
Ordering number: EN887B
Monolithic Linear IC
LA4183
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
53096HA(II)/O0207TA/2022KI,TS,ID No.887-1/11