
41608 MS PC/53096HA(II)/0267KI/5085MW/MW No.982-1/8
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer
's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
'sproductsor
equipment.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
LA2000
Overview
The LA2000 is an IC for detecting interprogram spaces to pick out the starting point of a program immediately preceding
or following a musical program recorded on tape, and to detect end of tape.
Used in
Radio-cassette recorders
Cassette decks
Car stereos
Applications
Detection of spaces between programs recorded on tape
Detection of end of tape
Other
Features
Has transistors capable of driving plungers with maximum 600mA, and a protective diode to prevent induced reverse
voltages.
Can provide designated time delays by externally connected capacitors and resistors.
Has a comparator with stable hysteresis to handle variations in power supply voltage.
Detects unrecorded portions of tape.
Specifications
Maximum Ratings at Ta = 25
°C
Parameter
Symbol
Conditions
Ratings
Unit
Maximum supply voltage
VCC max
15
V
Flow-in current
I6 max
600
mA
Allowable power dissipation
Pd max
540
mW
Operating temperature
Topr
-20 to +75
°C
Storage temperature
Tstg
-40 to +125
°C
Note : 1. The voltage at pin 8 must not exceed the supply voltage at pin 9.
2. The maximum current flowing into pin 8 should be no greater than 0.5mA.
Monolithic Linear IC
Audio Level Sensor
Ordering number : EN982D