
OneNAND1G(KFG1G16Q2M-DEB5)
FLASH MEMORY
7
OneNAND2G(KFH2G16Q2M-DEB5)
OneNAND4G(KFW4G16Q2M-DEB5)
1.5        Product Features    
Device Architecture
   
Design Technology:  
   
Supply Voltage:      
   
Host Interface:       
   
5KB Internal BufferRAM:
   
SLC NAND Array: 
Device Performance
   
Host Interface Type:
   
Programmable Burst Read Latency:
   
Multiple Sector Read/Write:              
   
Multiple Reset Modes:                       
   
Multi Block Erase:                               
   
Low Power Dissipation:                    
System Hardware
   
Voltage detector generating internal reset signal from Vcc
   
Hardware reset input (RP)                         
   
Data Protection Modes                                
   
User-controlled One Time Programmable(OTP) area
   
Internal 2bit EDC / 1bit ECC
   
Internal Bootloader supports Booting Solution in system
   
Handshaking Feature                                  
   
Detailed chip information                            
Packaging
   
1G products                                                            
   
2G DDP products                                                  
   
4G QDP products     
90nm
1.8V (1.7V ~ 1.95V)
16 bit 
1KB BootRAM, 4KB DataRAM
(2K+64)B Page Size, (128K+4K)B Block Size
Synchronous Burst Read
            - Up to 54MHz clock frequency
            - Linear Burst 4-, 8-, 16-, 32-words with wrap around
            - Continuous 1K word Sequential Burst
Asynchronous Random Read
            - 76ns access time
Asynchronous Random Write
Latency 3(up to 40MHz), 4, 5, 6, and 7
Up to 4 sectors using Sector Count Register
Cold/Warm/Hot/NAND Flash Core Resets
Up to 64 Blocks
Typical Power,
- Standby current :
                                 10uA @ Single , 20uA @ DDP, 40uA @ QDP
- Synchronous Burst Read current(54MHz) :
                                 12mA @ Single, 17mA @ DDP/QDP 
- Load current : 30mA
- Program current : 25mA
- Erase current : 20mA
- Multi Block Erase current : 20mA
- Endurance : 100K Program/Erase Cycles
- Data Retention : 10 Years
- Write Protection for BootRAM 
- Write Protection for NAND Flash Array
- Write Protection during power-up
- Write Protection during power-down
- INT pin indicates Ready / Busy
- Polling the interrupt register status bit 
- by ID register
63ball, 10mm x 13mm x max 1.0mmt, 0.8mm ball pitch FBGA
63ball, 11mm x 13mm x max 1.2mmt, 0.8mm ball pitch FBGA
63ball, 11mm x 13mm x max 1.4mmt, 0.8mm ball pitch FBGA