- 您現在的位置：買賣IC網 > PDF目錄353878 > JANTXV (Microsemi Corporation) DIODE ARRAY PRODUCT SPECIFICATION PDF資料下載
參數資料
| 型號： | JANTXV |
| 廠商： | Microsemi Corporation |
| 英文描述： | DIODE ARRAY PRODUCT SPECIFICATION |
| 中文描述： | 二極管陣列產品規格 |
| 文件頁數： | 4/21頁 |
| 文件大?。?/td> | 137K |
| 代理商： | JANTXV |
MIL-PRF-19500/368F
12
* 4.4.4 Group E inspection. Group E inspection shall be conducted in accordance with the conditions specified for
subgroup testing in appendix E, table IX of MIL-PRF-19500 and as specified in table III herein. Electrical
measurements (end-points) shall be in accordance with table I, group A, subgroup 2 herein. Delta measurements
shall be in accordance with the steps of 4.5.3.
4.5 Method of inspection. Methods of inspection shall be as specified in the appropriate tables and as follows.
4.5.1 Pulse measurements. Conditions for pulse measurement shall be as specified in section 4 of
MIL-STD-750.
4.5.2 Thermal resistance. Thermal resistance measurements shall be conducted in accordance with method 3131
of MIL-STD-750. The following conditions shall apply:
a.
Collector current magnitude during power application shall be 150 mA dc for RθJC.
b.
Collector emitter voltage magnitude shall be 10 V dc.
c.
Reference temperature measuring point shall be the case.
d.
Reference temperature measuring point shall be +25
°C ≤ T
R ≤ +35°C. The chosen reference
temperature shall be recorded before the test is started.
e.
Mounting arrangement shall be with heat sink to case for RθJC.
Maximum limit shall be RθJC = 35°C/W.
* 4.5.3 Delta requirements. Delta requirements shall be as specified below:
Step
Inspection
MIL-STD-750
Symbol
Unit
Method
Conditions
1
Collector-base cutoff
current
3036
Bias condition D,
VCB = 360 V dc for 2N3439, 2N3439L,
2N3439UA
VCB = 250 V dc for 2N3440, 2N3440L,
2N3440UA
ICB01
(1)
100 percent of initial
value or 200 nA dc,
whichever is greater.
2
Forward current
transfer ratio
3076
VCE = 10 V dc;
IC = 20 mA dc;
pulsed see 4.5.1
hFE1
(1)
±15 percent change
from initial reading.
(1) Devices which exceed the table I, group A limits for this test shall not be accepted.
相關PDF資料 |
PDF描述 |
|---|---|
| JANTX1N5415 | Coiled Cord; Features:6' positive coil memory combats cord stretch out; date coded for traceability; stainless steel spinning style banana plug reduces cord tangles; For Use With:WBB-AFWS Adjustable Fabric Wrist Strap RoHS Compliant: NA |
| JANTX1N5416 | CORD, COILED, 10MM STUD-4MM SKT, 2M; Length, lead:2m RoHS Compliant: NA |
| JANTX1N5417 | CORD, COILED, 10MM STUD-STUD, 2M; Length, lead:2m RoHS Compliant: NA |
| JANTX1N5418 | Personal protection, Sorbents RoHS Compliant: NA |
| JANTX1N5419 | GROUND CORD, 2X4MM SOCKETS, 5M; Length, lead:15ft RoHS Compliant: NA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| JANTXV16SYQ030C | 制造商:International Rectifier 功能描述:JANTXV16SYQ030C - Bulk |
| JANTXV16YQ100C | 制造商:International Rectifier 功能描述:JANTXV16YQ100C - Bulk |
| JANTXV1N1184 | 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 100V 40A 2PIN DO-203AB - Bulk |
| JANTXV1N1184R | 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 100V 40A 2PIN DO-203AB - Bulk |
| JANTXV1N1186 | 制造商:Microsemi Corporation 功能描述:STD RECOVERY RECTFR 200V 40A 2PIN DO-203AB - Bulk |
發布緊急采購，3分鐘左右您將得到回復。