參數資料
型號: JANTXV2N6898
英文描述: TRANSISTOR | MOSFET | P-CHANNEL | 100V V(BR)DSS | 25A I(D) | TO-204AE
中文描述: 晶體管| MOSFET的| P通道| 100V的五(巴西)直|第25A條(?。﹟對204AE
文件頁數: 3/19頁
文件大?。?/td> 103K
代理商: JANTXV2N6898
MIL-PRF-19500/512E
11
4.4.2.2 Group B inspection, (JAN, JANTX and JANTXV). Separate samples may be used for each step. In the
event of a group B failure, the manufacturer may pull a new sample at double size from either the failed assembly lot
or from another assembly lot from the same wafer lot. If the new “assembly lot” option is exercised, the failed
assembly lot shall be scrapped.
Step
Method
Condition
1
1039
Steady-state life: Test condition B, 340 hours, VCB = 10 - 20 V dc, power shall
be applied to the device to achieve TJ = +150°C minimum, and a minimum of PD
= 75 percent of maximum rated PT as defined in 1.3 herein. n = 45, c = 0.
2
1039
The steady-state life test of step 1 shall be extended to 1,000 hours for each die
design. Samples shall be selected from a wafer lot every twelve months of wafer
production. Group B, step 2 shall not be required more than once for any single
wafer lot. n = 45, c = 0.
3
1032
High- temperature life (non-operating), T
A = +200°C, t = 340 hours, n = 22,
c = 0.
4.4.2.3 Group B sample selection. Samples selected from group B inspection shall meet all of the following
requirements:
a.
For JAN, JANTX, and JANTXV samples shall be selected randomly from a minimum of three wafers (or
from each wafer in the lot) from each wafer lot. For JANS, samples shall be selected from each inspection
lot. See MIL-PRF-19500.
b.
Must be chosen from an inspection lot that has been submitted to and passed group A, subgroup 2,
conformance inspection. When the final lead finish is solder or any plating prone to oxidation at high
temperature, the samples for life test (subgroups B4 and B5 for JANS, and group B for JAN, JANTX, and
JANTXV) may be pulled prior to the application of final lead finish.
4.4.3 Group C inspection. Group C inspection shall be conducted in accordance with the tests and conditions
specified for subgroup testing in table VII of MIL-PRF-19500, and in 4.4.3.1 (JANS) and 4.4.3.2 (JAN, JANTX, and
JANTXV) herein for group C testing. Electrical measurements (end-points) and delta requirements shall be in
accordance with group A, subgroup 2 and 4.5.2 herein; delta requirements only apply to subgroup C6.
4.4.3.1 Group C inspection, table VII (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; (method 2036 not applicable for UA and UB devices).
C6
1026
1,000 hours at VCB = 10 V dc; power shall be applied to achieve TJ = +150°C
minimum and a minimum of PD = 75 percent of maximum rated PT as defined in
1.3.
4.4.3.2 Group C inspection, table VII (JAN, JANTX, and JANTXV) of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E; not applicable for UA and UB devices.
C6
Not applicable.
相關PDF資料
PDF描述
JANTXV2N6902 TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 12A I(D) | TO-204AA
JANTXV2N6904 TRANSISTOR | MOSFET | N-CHANNEL | 200V V(BR)DSS | 8A I(D) | TO-204AA
JANTXV2N6987 TRANSISTOR | BJT | ARRAY | INDEPENDENT | 60V V(BR)CEO | 600MA I(C) | TO-116
JANTXV2N6987U TRANSISTOR | BJT | ARRAY | INDEPENDENT | 60V V(BR)CEO | 600MA I(C) | LLCC
JANTXV2N918UB BJT
相關代理商/技術參數
參數描述
JANTXV2N6901 制造商:Microsemi Corporation 功能描述:Trans MOSFET N-CH 100V 1.69A 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:2N6901JANTXV - Bulk
JANTXV2N6987 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 60V 0.6A 14PIN TO-116 - Bulk 制造商:Microsemi Corporation 功能描述:TRANS PNP QUAD 60V 600MA TO116
JANTXV2N6987U 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 60V 0.6A 20LLCC - Bulk
Jantxv2N6988 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 60V 0.6A 14PIN FLATPACK - Bulk 制造商:Microsemi Corporation 功能描述:TRANS PNP QUAD
Jantxv2N6989 制造商:Microsemi Corporation 功能描述:NPN QUAD TRANSISTOR (NPNQ) - Bulk 制造商:Microsemi Corporation 功能描述:TRANS NPN QUAD 50V 800MA TO116