ispLSI 1048EA
In-System Programmable High Density PLD
1048ea_04
1
USE
ispMA
CH
4A5
FOR
NEW
5V
DESIGNS
Functional Block Diagram
Features
HIGH DENSITY PROGRAMMABLE LOGIC
— 8,000 PLD Gates
— 96 I/O Pins, Eight Dedicated Inputs
— 288 Registers
— High-Speed Global Interconnects
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
— Functionally Compatible with ispLSI 1048C and 1048E
NEW FEATURES
— 100% IEEE 1149.1 Boundary Scan Testable
— ispJTAG In-System Programmable Via IEEE 1149.1
(JTAG) Test Access Port
— User Selectable 3.3V or 5V I/O supports Mixed
Voltage Systems (VCCIO Pin)
— Open Drain Output Option
HIGH PERFORMANCE E2CMOS TECHNOLOGY
—
fmax = 170 MHz Maximum Operating Frequency
—
tpd = 5.0 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Eraseable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
IN-SYSTEM PROGRAMMABLE
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
Output Routing Pool
F7 F6 F5 F4 F3 F2 F1 F0
B0 B1 B2 B3 B4 B5 B6 B7
A0
A1
A2
A3
A4
A5
A6
A7
Output
Routing
Pool
Output Routing Pool
CLK
E7 E6 E5 E4 E3 E2 E1 E0
C0 C1 C2 C3 C4 C5 C6 C7
D7
D6
D5
D4
D3
D2
D1
D0
Output
Routing
Pool
Logic
Array
DQ
Global Routing Pool (GRP)
GLB
0139A/1048EA
Description
The ispLSI 1048EA is a High Density Programmable
Logic Device containing 288 Registers, 96 Universal I/O
pins, eight Dedicated Input pins, four Dedicated Clock
Input pins, two dedicated Global OE input pins, and a
Global Routing Pool (GRP). The GRP provides complete
interconnectivity between all of these elements. The
ispLSI 1048EA features 5V in-system programmability
and in-system diagnostic capabilities via IEEE 1149.1
Test Access Port. The ispLSI 1048EA offers non-volatile
reprogrammability of the logic, as well as the intercon-
nect to provide truly reconfigurable systems. A functional
superset of the ispLSI 1048 architecture, the ispLSI
1048EA device adds user selectable 3.3V or 5V I/O and
open-drain output options.
The basic unit of logic on the ispLSI 1048EA device is the
Generic Logic Block (GLB). The GLBs are labeled A0,
A1…F7 (see Figure 1). There are a total of 48 GLBs in the
ispLSI 1048EA device. Each GLB has 18 inputs, a
programmable AND/OR/Exclusive OR array, and four
outputs which can be configured to be either combinato-
rial or registered. Inputs to the GLB come from the GRP
and dedicated inputs. All of the GLB outputs are brought
back into the GRP so that they can be connected to the
inputs of any other GLB on the device.
Copyright 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
January 2002
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com