![](http://datasheet.mmic.net.cn/Intersil/ISL54052IRUZ-T_datasheet_97656/ISL54052IRUZ-T_5.png)
5
FN6459.3
October 19, 2009
Electrical Specifications - 1.8V SupplyTest Conditions: V+ = +1.8V, GND = 0V, VINH = 1V, VINL = 0.4V (Note 4),
Unless Otherwise Specified. Boldface limits apply over the operating tempera-
ture range, -40°C to +85°C.
PARAMETER
TEST CONDITIONS
TEMP
(°C)
MIN
MAX
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range,
VANALOG
Full
0
-
V+
V
ON-Resistance, rON
V+ = 1.8V, ICOM = 100mA, VNO or
VNC = 0V to V+ (See Figure 4, Note 13) 25
-
2.33
-
Ω
Full
-
2.54
-
Ω
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 1.8V, VNO or VNC = 1.5V, RL = 50Ω,
CL = 35pF (See Figure 1, Note 13) 25
-
68
-
ns
Full
-
93
-
ns
Turn-OFF Time, tOFF
V+ = 1.8V, VNO or VNC = 1.5V, RL = 50Ω,
CL = 35pF (See Figure 1, Note 13) 25
-
45
-
ns
Full
-
71
-
ns
Charge Injection, Q
VG = V+/2, RG = 0Ω, CL = 1.0nF
25
-
18
-
pC
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, VINL
Full
-
-
0.4
V
Input Voltage High, VINH
Full
1
-
-
V
NOTES:
9. VIN = input voltage to perform proper function.
10. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this
data sheet.
11. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established
by characterization and are not production tested.
12. Flatness is defined as the difference between maximum and minimum value of ON-resistance over the specified analog signal
range.
13. Limits established by characterization and are not production tested.
ISL54051, ISL54052