4
Absolute Maximum Ratings
Thermal Information
VCC to Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6V
VL to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 7V
V+ to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 7V
V- to Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3V to -7V
V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14V
Input Voltages
TIN, SHDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6V
RIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25V
Output Voltages
TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±13.2V
ROUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to (VL +0.3V)
Short Circuit Duration
TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Thermal Resistance (Typical, Notes
1, 2)θJA (°C/W) θJC (°C/W)
32 Ld QFN Package. . . . . . . . . . . . . . .
30
2.2
Moisture Sensitivity (see Technical Brief TB363)
QFN Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Level 1
Maximum Junction Temperature (Plastic Package) . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
Operating Conditions
Temperature Range
ISL4260EIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
1.
θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379, and Tech Brief TB389.
2. For
θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Test Conditions: VCC = 3V to 5.5V, C1 - C4 = 0.1μF, VL = VCC; Unless Otherwise Specified.
Typicals are at TA = 25oC, VCC = VL = 3.3V
PARAMETER
TEST CONDITIONS
TEMP
(oC)
MIN
TYP
MAX
UNITS
DC CHARACTERISTICS
Supply Current, Powerdown
SHDN = GND, All Inputs at VCC or GND
25
-
0.15
1
μA
Supply Current
All Outputs Unloaded, SHDN =VCC, VCC = 3.15V
25
-
0.3
1
mA
LOGIC AND TRANSMITTER INPUTS
Input Logic Threshold Low
TIN, SHDN
VL = 3.3V or 5V
Full
-
0.8
V
VL = 2.5V
Full
-
0.6
V
Input Logic Threshold High
TIN, SHDN
VL = 5V
Full
2.4
-
V
VL = 3.3V
Full
2.0
-
V
VL = 2.5V
Full
1.4
-
V
VL = 1.8V
25
-
0.9
-
V
Transmitter Input Hysteresis
25
-
0.5
-
V
Input Leakage Current
TIN, SHDN
Full
-
±0.01
±1
μA
RECEIVER OUTPUTS
Output Leakage Current
VCC = 0V or 3V to 5.5V, SHDN =GND
Full
-
±0.05
±10
μA
Output Voltage Low
IOUT = 1.6mA
Full
-
0.4
V
Output Voltage High
IOUT = -1.0mA
Full
VL - 0.6 VL - 0.1
-
V
RECEIVER INPUTS
Input Voltage Range
Full
-25
-
25
V
Input Threshold Low
VL = 5.0V
25
0.8
1.5
-
V
VL = 3.3V
25
0.6
1.2
-
V
Input Threshold High
VL = 5.0V
25
-
1.8
2.4
V
VL = 3.3V
25
-
1.5
2.4
V
Input Hysteresis
25
-
0.5
-
V
ISL4260E