- 您現在的位置：買賣IC網 > PDF目錄2152 > ISL28195FHZ-T7A (Intersil)IC OPAMP RRIO 1UA SOT23-6 PDF資料下載
參數資料
| 型號： | ISL28195FHZ-T7A |
| 廠商： | Intersil |
| 文件頁數： | 2/12頁 |
| 文件大小： | 0K |
| 描述： | IC OPAMP RRIO 1UA SOT23-6 |
| 標準包裝： | 1 |
| 放大器類型： | 通用 |
| 電路數： | 1 |
| 輸出類型： | 滿擺幅 |
| 轉換速率： | 0.0042 V/µs |
| 增益帶寬積： | 10kHz |
| 電流 - 輸入偏壓： | 15pA |
| 電壓 - 輸入偏移： | 100µV |
| 電流 - 電源： | 1µA |
| 電流 - 輸出 / 通道： | 12mA |
| 電壓 - 電源，單路/雙路(±)： | 1.8 V ~ 5.5 V，±0.9 V ~ 2.75 V |
| 工作溫度： | -40°C ~ 125°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SOT-23-6 |
| 供應商設備封裝： | SOT-23-6 |
| 包裝： | 標準包裝 |
| 其它名稱： | ISL28195FHZ-T7ADKR |
10
FN6236.5
January 14, 2014
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
For additional products, see www.intersil.com/en/products.html
In the disabled state (output in a high impedance state), the
supply current is reduced to typical of only 2nA. By disabling
the devices, multiple parts can be connected together as a
MUX. In this configuration, the outputs are tied together in
parallel and a channel can be selected by the EN pin. The
EN pin should never be left floating. The EN pin should be
connected directly to the V+ supply when not in use.
The loading effects of the feedback resistors of the disabled
amplifier must be considered when multiple amplifier outputs
are connected together.
Proper Layout Maximizes Performance
To achieve the maximum performance of the high input
impedance, care should be taken in the circuit board layout.
The PC board surface must remain clean and free of moisture
to avoid leakage currents between adjacent traces. Surface
coating of the circuit board will reduce surface moisture and
provide a humidity barrier, reducing parasitic resistance on the
board. When input leakage current is a concern, the use of
guard rings around the amplifier inputs will further reduce
leakage currents. Figure 30 shows a guard ring example for a
unity gain amplifier that uses the low impedance amplifier
output at the same voltage as the high impedance input to
eliminate surface leakage. The guard ring does not need to be
a specific width, but it should form a continuous loop around
both inputs. For further reduction of leakage currents,
components can be mounted to the PC board using Teflon
standoff insulators.
Power Dissipation
It is possible to exceed the +150°C maximum junction
temperatures under certain load and power-supply
conditions. It is therefore important to calculate the
maximum junction temperature (TJMAX) for all applications
to determine if power supply voltages, load conditions, or
package type need to be modified to remain in the safe
operating area. These parameters are related in Equation 1:
where:
PDMAXTOTAL is the sum of the maximum power
dissipation of each amplifier in the package (PDMAX)
PDMAX for each amplifier can be calculated as shown in
Equation 2:
where:
TMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
PDMAX = Maximum power dissipation of 1 amplifier
VS = Supply voltage (Magnitude of V+ and V-)
IMAX = Maximum supply current of 1 amplifier
VOUTMAX = Maximum output voltage swing of the
application
RL = Load resistance
IN
V+
FIGURE 30. GUARD RING EXAMPLE FOR UNITY GAIN
AMPLIFIER
HIGH IMPEDANCE INPUT
T
JMAX
T
MAX
θ
JAxPDMAXTOTAL
()
+
=
(EQ. 1)
PD
MAX
2*V
S
I
SMAX
V
S
(
- V
OUTMAX )
V
OUTMAX
R
L
----------------------------
×
+
×
=
(EQ. 2)
ISL28194
相關PDF資料 |
PDF描述 |
|---|---|
| ISL28210FBZ | IC OPAMP JFET 12.5MHZ DUAL 8SOIC |
| ISL28217FUZ | IC OPAMP PREC 1.5MHZ DL LP 8MSOP |
| ISL28233IUZ-T7 | IC OPAMP GP R-R 400KHZ LN 8MSOP |
| ISL28236FBZ-T7 | IC OPAMP RRIO DUAL 5MHZ 8-SOIC |
| ISL28266FUZ | IC OPAMP RRIO CURRENT 39UA 8MSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ISL28195FRUZ-T7 | 功能描述:IC OPAMP RRIO SGL 1UA 6-TDFN RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 放大器類型:通用 電路數:1 輸出類型:滿擺幅 轉換速率:3 V/µs 增益帶寬積:10MHz -3db帶寬:- 電流 - 輸入偏壓:1pA 電壓 - 輸入偏移:70µV 電流 - 電源:2.5mA 電流 - 輸出 / 通道:48mA 電壓 - 電源，單路/雙路(±):2.7 V ~ 5.5 V，±1.35 V ~ 2.75 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-6 包裝:Digi-Reel® 其它名稱:MAX4475AUT#TG16DKR |
| ISL28196 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Ultra-Small, 800nA and 2.5μA Single Supply, Rail-to-Rail Input/Output RRIO Comparators |
| ISL28196 WAF | 制造商:Intersil Corporation 功能描述: |
| ISL28196EVAL1Z | 功能描述:EVALUATION BOARD FOR ISL28196 RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 主要目的:電源管理，電池充電器 嵌入式:否 已用 IC / 零件:MAX8903A 主要屬性:1 芯鋰離子電池 次要屬性:狀態 LED 已供物品:板 |
| ISL28196FHZ-T7 | 功能描述:IC COMPARATOR RRIO 2.5UA SOT23-6 RoHS:是 類別:集成電路 (IC) >> 線性 - 比較器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:帶電壓基準 元件數:4 輸出類型:開路漏極 電壓 - 電源，單路/雙路(±):2.5 V ~ 11 V，±1.25 V ~ 5.5 V 電壓 - 輸入偏移（最小值）:10mV @ 5V 電流 - 輸入偏壓（最小值）:- 電流 - 輸出（標準）:0.015mA @ 5V 電流 - 靜態（最大值）:8.5µA CMRR, PSRR（標準）:80dB CMRR，80dB PSRR 傳輸延遲（最大）:- 磁滯:- 工作溫度:0°C ~ 70°C 封裝/外殼:16-SOIC（0.154"，3.90mm 寬） 安裝類型:表面貼裝 包裝:管件 產品目錄頁面:1386 (CN2011-ZH PDF) |
發布緊急采購，3分鐘左右您將得到回復。