ISL28006
23
FN6548.6
November 22, 2013
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
REVISION
CHANGE
November 22, 2013
FN6548.6 Added eight new Typical Performance Curves
1. Av=100 Capacitive Load Drive Gain vs Freq
2. Av=100 Capacitive Load Drive Phase vs Freq
3. Av=50 Capacitive Load Drive Gain vs Freq
4. Av=50 Capacitive Load Drive Phase vs Freq
5. Av=20 Capacitive Load Drive Gain vs Freq
6. Av=20 Capacitive Load Drive Phase vs Freq
7. High Side Operation Input Bias Currents
8. Low Side Operation Input Bias Currents
Under Electrical Specifications Table:
Changed parameter from Is to Icc to clarify supply current
Ordering information table on
page 3: Changed Note 4 location in the table.
April 12, 2011
FN6548.5 Converted to new template
Page 1 - Changed headings for “Typical Application” and “Gain Accuracy vs VRS+ = 0V to 28V” to Figure titles
(Figures 1 and 2).
Page 1 - Updated Intersil Trademark statement at bottom of page 1 per directive from Legal.
Page 7 - Updated over temp note in Min Max column of spec tables from "Parameters with MIN and/or MAX limits
are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are
not production tested." to new standard "Compliance to datasheet limits is assured by one or more methods:
production test, characterization and/or design."
Page 19 - Figure 69, Low side current detection schematic: Moved the LOAD from the ground side of the power side
circuit to the high side.
September 2, 2010
FN6548.4 Added -T7A tape and reel options to Ordering Information Table for all packages.
May 12, 2010
FN6548.3 Added Note
4 to Part Marking Column in “Ordering Information” on
page 3.Corrected hyperlinks in Notes
1 and
3 in “Ordering Information” on
page 3.April 8, 2010
Removed “Coming Soon” from evaluation boards in “Ordering Information” on
page 3.April 7, 2010
Updated Package Drawing Number in the “Ordering Information” on
page 3 for the 20V, 50V and 100V options from
MDP0038 to P50.64A.
Revised package outline drawing from MDP0038 to P5.064A on page 24. MDP0038 package contained 2
packages for both the 5 and 6 Ld SOT-23. MDP0038 was obsoleted and the packages were separated and made
into 2 separate package outline drawings; P5.064A and P6.064A. Changes to the 5 Ld SOT-23 were to move
dimensions from table onto drawing, add land pattern and add JEDEC reference number.
March 10, 2010
FN6548.2 Releasing adjustable gain option.
Added adjustable block diagram (Page 2), Added adjustable gain limits to electrical spec table, added Figures 47
through 60, Added +85°C curves to Figures 6 thru 14, 20 thru 28, 34 thru 42, and Figures 48 thru 56. Modified
Figure 70.
February 4, 2010
FN6548.1 -Page 1:
Edited last sentence of paragraph 2.
Moved order of GAIN listings from 20, 50, 100 to 100, 50, 20 in the 3rd paragraph.
Under Features ....removed "Low Input Offset Voltage 250V, max"
Under Features .... moved order of parts listing from 20, 50, 100 (from top to bottom) to 100, 50, 20.
-Page 3: Removed coming soon on ISL28006FH50Z and ISL28006FH20Z and changes the order or listing them to
100, 50, 20.
-Page 5: VOA test. Under conditions column ...deleted 20mV to. It now reads ... Vsense = 100mV
SR test. Under conditions column ..deleted what was there. It now reads ... Pulse on RS+pin, See Figure 51
-Page 6: ts test. Removed Gain = 100 and Gain = 100V/V in both description and conditions columns respectively.
-Page 9: Added VRS+= 12V to Figures 16, 17, 18.
-Page 11: Added VRS+= 12V to Figures 30, 31, 32.
-Page 13 & 14: Added VRS+= 12V to Figures 44, 45, 46.
-Page 14 Added Figure 51 and adjusted figure numbers to account for the added figure.
-Figs 8, 26, and 40 change "HIGH SIDE" to "VRS = 12V", where RS is subscript.
-Figs 9, 27, and 41 change "LOW SIDE" to "VRS = 0.1V", where RS is subscript.
December 14, 2009
FN6548.0 Initial Release