ISL28005
14
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see
www.intersil.comFN6973.5
October 24, 2013
About Intersil
Intersil Corporation is a leader in the design and manufacture of high-performance analog, mixed-signal and power management
semiconductors. The company's products address some of the largest markets within the industrial and infrastructure, personal
computing and high-end consumer markets. For more information about Intersil, visit our website at
www.intersil.com.For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at
www.intersil.com. You may report errors or suggestions for improving this datasheet by visiting
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you have the latest Rev.
DATE
REVISION
CHANGE
October 24, 2013
FN6973.5
Added eight new Typical Performance Curves
1. Av = 100 Capacitive Load Drive Gain vs Freq
2. Av = 100 Capacitive Load Drive Phase vs Freq
3. Av = 50 Capacitive Load Drive Gain vs Freq
4. Av = 50 Capacitive Load Drive Phase vs Freq
5. Av = 20 Capacitive Load Drive Gain vs Freq
6. Av = 20 Capacitive Load Drive Phase vs Freq
7. High Side Operation Input Bias Currents
8. Low Side Operation Input Bias Currents
Under Electrical Specifications Table:
Changed parameter from Is to Icc to clarify supply current.
April 11, 2011
FN6973.4
Corrected location of the load in Figure
27. Moved Load from the ground side of the input sense circuit to the high side of the
voltage source.
Updated note in Min Max column of spec table from "Parameters with MIN and/or MAX limits are 100% tested at +25°C,
unless otherwise specified. Temperature limits established by characterization and are not production tested." to
"Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design."
September 2, 2010
FN6973.3
Added -T7A tape and reel package options to Ordering Information Table for all packages.
May 12, 2010
FN6973.2
Added Note
4 to Part Marking Column in “Ordering Information” on
page 3.Corrected hyperlinks in Notes
1 and
3 in “Ordering Information” on
page 3.April 12, 2010
Added Eval boards to ordering info.
April 7, 2010
Updated Package Drawing Number in the “Ordering Information” on
page 3 from MDP0038 to P50.64A.
Revised package outline drawing from MDP0038 to P5.064A on
page 15. MDP0038 package contained 2 packages for both
the 5 and 6 Ld SOT-23. MDP0038 was obsoleted and the packages were separated and made into 2 separate package
outline drawings; P5.064A and P6.064A. Changes to the 5 Ld SOT-23 were to move dimensions from table onto drawing,
add land pattern and add JEDEC reference number.
February 3, 2010
FN6973.1
-Page1:
Edited last sentence of paragraph 2.
Moved order of GAIN listings from 20, 50, 100 to 100, 50, 20 in the 3rd paragraph.
Under Features ....removed "Low Input Offset Voltage 250V,max"
Under Features .... moved order of parts listing from 20, 50, 100 (from top to bottom) to 100, 50, 20.
-Page 3:
Removed coming soon on ISL28005FH50Z and ISL28005FH20Z and changes the order or listing them to 100, 50, 20.
-Page 5:
VOA test. Under conditions column ...deleted “20mV to”. It now reads ... Vsense = 100mV
SR test. Under conditions column ..deleted what was there. It now reads ... Pulse on RS+pin, See Figure
25-Page 6:
ts test. Removed Gain = 100 and Gain = 100V/V in both description and conditions columns respectively.
-Page 9
Added Figure
25 and adjusted figure numbers to account for the added figure.
December 14, 2009
FN6973.0
Initial Release