參數資料
型號： ISD-300A1
英文描述： Universal Serial Bus
中文描述： 通用串行總線
文件頁數： 33/67頁
文件大?。?/td> 580K
代理商： ISD-300A1
ISD-300A1
28
October 19, 2001
ATA/ATAPI Interface
The ATA/ATAPI port on the ISD-300A1 is compliant with the
Information Technology – AT Attachment
with Packet Interface – 5 (ATA/ATAPI-5) Specification, T13/1321D Rev 3
. The ISD-300A1 supports both
ATAPI packet commands as well as ATA commands (by use of ATA Command Blocks). Additionally,
the ISD-300A1 translates ATAPI SFF-8070i commands to ATA commands for seamless integration of
ATA devices with generic Mass Storage Class BOT drivers. The ISD-300A1 also provides a vendor-
specific “event notify” ATA command to automatically communicate certain USB and system events to the
attached device.
Protocol
The ISD-300A1 supports command protocol flows as defined in the
ATA/ATAPI-5 Specification
.
Commands are grouped into different classes, based on the protocol followed for command execution.
The ATA/ATAPI interface supports the following clarifications:
Immediately after the reset recovery period, the ISD-300A1 will write 0x00 to the Device Control
register.
Arbitrary byte count transfers are supported.
16-bit data reads and writes are supported.
8-bit data transfers are not supported.
Reset Mapping
The ATA/ATAPI interface responds to several resets: Power-on, USB, MSC, and Vendor-specific Soft
reset.
In the case of a power-on reset, a full device initialization is performed. FBh data is retrieved and stored if
the I_MODE pin is set active.
In the cases of USB reset and MSC reset, a partial initialization is performed which excludes all attempts to
perform Identify Device commands.
In the case of a Vendor-specific Soft reset, only the internal ISD-300A1 state machines are reset.
Device Requirements
Attached mass storage devices must support the following:
ATA Reset, A1h, FBh
After deassertion of ATA_NRESET, BSY and DRQ must be cleared by the device within the ATA
Initialization Timeout configuration setting value.
ATA Polling Device
The device shall be capable of being a polling only device. The ATA signal
INTRQ
is not used by the
ISD-300A1.
相關PDF資料
PDF描述
ISD-SR3000
ISD1100SERIES ISD1110/ISD1112 Part2
ISD1200SERIES ISD1210/ISD1212 Part3
ISD1400_1
ISD1400_2
相關代理商/技術參數
參數描述
ISD306T 制造商:ADAM-TECH 制造商全稱:Adam Technologies, Inc. 功能描述:IC SOCKETS SINGLE & DUAL ROW SOCKETS
ISD328T 制造商:ADAM-TECH 制造商全稱:Adam Technologies, Inc. 功能描述:IC SOCKETS SINGLE & DUAL ROW SOCKETS
ISD33000 制造商:未知廠家 制造商全稱:未知廠家 功能描述:單片語音錄放電路
ISD33060 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Single-Chip Voice Record/Playback Devices 60-, 75-, 90-, and 120-Second Durations
ISD33060-4 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*