參數資料
型號： IDT821054
廠商： Integrated Device Technology, Inc.
元件分類： Codec
英文描述： QUAD PROGRAMMABLE PCM CODEC WITH MPI INTERFACE
中文描述： 四可編程PCM編解碼器的MPI接口
文件頁數： 31/45頁
文件大?。?/td> 506K
代理商： IDT821054
31
IDT821054 QUAD PROGRAMMABLE PCM CODEC WITH MPI INTERFACE INDUSTRIAL TEMPERATURE RANGE
3.4.3
LOCAL REGISTERS LIST
LREG1: Coefficient Selection, Read/Write (00H/80H)
The Coefficient Select bits (CS[7:0]) are used to control digital filters and function blocks on each channel. The digital filters include
Impedance Matching Filter, Echo Cancellation Filter, High-Pass Filter, Gain for Impedance Scaling, Gain in the Transmit/Receive Path
and Frequency Response Correction in the Transmit/Receive Path. See
Figure - 4 on page 11
for details. It should be noted that the
Impedance Matching Filter and Gain for Impedance Scaling are working together to adjust the impedance. So the CS[0] and CS[2] bits
should be set to the same value to ensure proper operation.
CS [7] = 0: The Digital Gain Filter in the Receive path (GRX) is disabled (default);
CS [7] = 1: The Digital Gain in the Receive path (GRX) is programmed by the Coe-RAM.
CS [6] = 0: The Frequency Response Correction filter in the Receive path (FRR) is disabled (default);
CS [6] = 1: The coefficient of the Frequency Response Correction filter in the Receive path (FRR) is programmed by the Coe-RAM.
CS [5] = 0: The Digital Gain Filter in the Transmit path (GTX) is disabled (default);
CS [5] = 1: The Digital Gain in the Transmit path (GTX) is set by the Coe-RAM.
CS [4] = 0: The Frequency Response Correction filter in the Transmit path (FRX) is disabled (default);
CS [4] = 1: The coefficient of the Frequency Response Correction filter in the Transmit path (FRX) is programmed by the Coe-RAM.
CS [3] = 0: The High-Pass Filter (HPF) is bypassed/disabled;
CS [3] = 1: The High-Pass Filter (HPF) is enabled (default).
CS [2] = 0: The Gain for Impedance Scaling filter (GIS) is disabled (default);
CS [2] = 1: The coefficient of the Gain for Impedance Scaling filter (GIS) is programmed by the Coe-RAM.
CS [1] = 0: The Echo Cancellation Filter (ECF) is disabled (default);
CS [1] = 1: The coefficient of the Echo Cancellation Filter (ECF) is programmed by the Coe-RAM.
CS [0] = 0: The Impedance Matching Filter (IMF) is disabled (default);
CS [0] = 1: The coefficient of theImpedance Matching Filter (IMF) is programmed by the Coe-RAM.
LREG2: Local Loopback Control and SLIC Input Interrupt Enable, Read/Write (01H/81H)
The SLIC Input Interrupt Enable bits IE[4:0] enable or disable the interrupt signal on each channel.
IE[4] = 0: Interrupt disabled. The interrupt generated by changes of SB3 (when SB3 is selected as an input) will be ignored (default);
IE[4] = 1: Interrupt enabled. The interrupt generated by changes of SB3 (when SB3 is selected as an input) will be recognized.
IE[3] = 0: Interrupt disabled. The interrupt generated by changes of SB2 (when SB2 is selected as an input) will be ignored (default);
IE[3] = 1: Interrupt enabled. The interrupt generated by changes of SB2 (when SB2 is selected as an input) will be recognized.
IE[2] = 0: Interrupt disabled. The interrupt generated by changes of SB1 (when SB1 is selected as an input) will be ignored (default);
IE[2] = 1: Interrupt enabled. The interrupt generated by changes of SB1 (when SB1 is selected as an input) will be recognized.
IE[1] = 0: Interrupt disabled. The interrupt generated by changes of SI2 will be ignored (default);
IE[1] = 1: Interrupt enabled. The interrupt generated by changes of SI2 will be recognized.
IE[0] = 0: Interrupt disabled. The interrupt generated by changes of SI1 will be ignored (default);
b7
b6
b5
b4
b3
b2
b1
b0
Command
R
/W
0
0
0
0
0
0
0
I/O data
CS[7]
CS[6]
CS[5]
CS[4]
CS[3]
CS[2]
CS[1]
CS[0]
b7
b6
b5
b4
b3
b2
b1
b0
Command
R
/W
0
0
0
0
0
0
1
I/O data
IE[4]
IE[3]
IE[2]
IE[1]
IE[0]
DLB_PCM
ALB_1BIT
DLB_1BIT
相關PDF資料
PDF描述
IDT821054PQF QUAD PROGRAMMABLE PCM CODEC WITH MPI INTERFACE
IDT821064 QUAD PROGRAMMABLE PCM CODEC WITH GCI INTERFACE
IDT821064PQF QUAD PROGRAMMABLE PCM CODEC WITH GCI INTERFACE
IDT821068 OCTAL PROGRAMMABLE PCM CODEC
IDT821068PX OCTAL PROGRAMMABLE PCM CODEC
相關代理商/技術參數
參數描述
IDT821054A 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:QUAD PROGRAMMABLE PCM CODEC WITH MPI INTERFACE
IDT821054APF 功能描述:IC PCM CODEC QUAD MPI 64-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:立體聲音頻 數據接口:串行 分辨率（位）:18 b ADC / DAC 數量:2 / 2 三角積分調變:是 S/N 比，標準 ADC / DAC (db):81.5 / 88 動態范圍，標準 ADC / DAC (db):82 / 87.5 電壓 - 電源，模擬:2.6 V ~ 3.3 V 電壓 - 電源，數字:1.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-WFQFN 裸露焊盤 供應商設備封裝:48-TQFN-EP（7x7） 包裝:帶卷 (TR)
IDT821054APF8 功能描述:IC PCM CODEC QUAD MPI 64-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:立體聲音頻 數據接口:串行 分辨率（位）:18 b ADC / DAC 數量:2 / 2 三角積分調變:是 S/N 比，標準 ADC / DAC (db):81.5 / 88 動態范圍，標準 ADC / DAC (db):82 / 87.5 電壓 - 電源，模擬:2.6 V ~ 3.3 V 電壓 - 電源，數字:1.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-WFQFN 裸露焊盤 供應商設備封裝:48-TQFN-EP（7x7） 包裝:帶卷 (TR)
IDT821054APFG 功能描述:IC PCM CODEC QUAD MPI 64-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:立體聲音頻 數據接口:串行 分辨率（位）:18 b ADC / DAC 數量:2 / 2 三角積分調變:是 S/N 比，標準 ADC / DAC (db):81.5 / 88 動態范圍，標準 ADC / DAC (db):82 / 87.5 電壓 - 電源，模擬:2.6 V ~ 3.3 V 電壓 - 電源，數字:1.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-WFQFN 裸露焊盤 供應商設備封裝:48-TQFN-EP（7x7） 包裝:帶卷 (TR)
IDT821054APFG8 功能描述:IC PCM CODEC QUAD MPI 64-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編解碼器 系列:- 標準包裝:2,500 系列:- 類型:立體聲音頻 數據接口:串行 分辨率（位）:18 b ADC / DAC 數量:2 / 2 三角積分調變:是 S/N 比，標準 ADC / DAC (db):81.5 / 88 動態范圍，標準 ADC / DAC (db):82 / 87.5 電壓 - 電源，模擬:2.6 V ~ 3.3 V 電壓 - 電源，數字:1.7 V ~ 3.3 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-WFQFN 裸露焊盤 供應商設備封裝:48-TQFN-EP（7x7） 包裝:帶卷 (TR)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*