- 您現在的位置：買賣IC網 > PDF目錄383097 > ICX422 (Sony Corporation) Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Cameras PDF資料下載
參數資料
| 型號： | ICX422 |
| 廠商： | Sony Corporation |
| 英文描述： | Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Cameras |
| 中文描述： | 對角線11毫米（類型2 / 3）CCD圖像傳感器的環境影響評估/黑白視頻攝像機 |
| 文件頁數： | 10/16頁 |
| 文件大小： | 161K |
| 代理商： | ICX422 |
–
10
–
ICX422AL
Light
Signal output 350mV
Vlag (lag)
FLD
V1
Strobe light
timing
Output
1
10
1
500
350
3. Smear
Set to standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity to
500 times the intensity with average value of the signal output, 350mV. When the readout clock is stopped
and the charge drain is executed by the electronic shutter at the respective H blankings, measure the
maximum value (VSm [mV]) of the signal output and substitute the value into the following formula.
Sm = 20
×
log VSm
×
×
×
100 [dB] (1/10V method conversion value)
4. Video signal shading
Set to standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity so
that the average value of the signal output is 350mV. Then measure the maximum (Vmax [mV]) and
minimum (Vmin [mV]) values of the signal output and substitute the values into the following formula.
SH = (Vmax
–
Vmin)/350
×
100 [%]
5. Dark signal
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60
°
C and
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.
6. Dark signal shading
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Vdt = Vdmax
–
Vdmin [mV]
7. Flicker
Set to standard imaging condition
II
. Adjust the luminous intensity so that the average value of the signal
output is 350mV, and then measure the difference in the signal level between fields (
Vf [mV]). Then
substitute the value into the following formula.
F = (
Vf/350)
×
100 [%]
8. Lag
Adjust the signal output value generated by strobe light to 350mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/350)
×
100 [%]
相關PDF資料 |
PDF描述 |
|---|---|
| ICX422AL | Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Cameras |
| ICX423 | Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX423AL | Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX424AQ | Diagonal 6mm Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras |
| ICX424AL | Diagonal 6mm (Type 1/3) Progressive Scan CCD Solid-state Image Sensor with Square Pixel for B/W Cameras |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ICX422AL | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Cameras |
| ICX423 | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX423AL | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX424AL | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) Progressive Scan CCD Solid-state Image Sensor with Square Pixel for B/W Cameras |
| ICX424AQ | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras |
發布緊急采購，3分鐘左右您將得到回復。