參數(shù)資料
型號: ICX085
廠商: Sony Corporation
英文描述: Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras
中文描述: 對角線11毫米的方形像素(類型2 / 3)逐行掃描CCD圖像傳感器的彩色攝像機
文件頁數(shù): 11/19頁
文件大?。?/td> 199K
代理商: ICX085
– 11 –
ICX085AK
Definition of standard imaging conditions
1) Standard imaging condition
I
:
Use a pattern box (luminance 706cd/m
2
, color temperature of 3200K halogen source ) as a subject.
(Pattern for evaluation is not applicable.) Use a testing standard lens with CM500S (t = 1.0mm) as an IR
cut filter and image at F5.6. The luminous intensity to the sensor receiving surface at this point is defined
as the standard sensitivity testing luminous intensity.
2) Standard imaging condition
II
:
Image a light source (color temperature of 3200K) with a uniformity of brightness within 2% at all angles.
Use a testing standard lens with CM500S (t = 1.0mm) as an IR cut filter. The luminous intensity is adjusted
to the value indicated in each testing item by the lens diaphragm.
1. G sensitivity, sensitivity comparison
Set to standard imaging condition
I
. After selecting the electronic shutter mode with a shutter speed of
1/80s, measure the signal outputs (V
Gr
, V
Gb
, V
R
and V
B
) at the center of each Gr, Gb, R and B channel
screens, and substitute the values into the following formula.
V
G
= (V
Gr
+ V
Gb
)/2
Sg = V
G
×
Rr = V
R
/V
G
[mV]
Rb = V
B
/V
G
2. Saturation signal
Set to standard imaging condition
II
. After adjusting the luminous intensity to 10 times the intensity with the
average value of the Gr signal output, 150mV, measure the minimum values of the Gr, Gb, R and B signal
outputs.
3. Smear
Set to standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, first adjust the average value
of the Gr signal output to 150mV. Measure the average values of the Gr signal output, Gb signal output, R
signal output and B signal output (Gra, Gba, Ra and Ba), and then adjust the luminous intensity to 500
times the intensity with average value of the Gr signal output, 150mV. After the readout clock is stopped
and the charge drain is executed by the electronic shutter at the respective H blankings, measure the
maximum value (V
Sm
[mV]), independent of the Gr, Gb, R and B signal outputs, and substitute the values
into the following formula.
Sm = V
Sm
÷
×
×
×
100 [%] (1/10V method conversion value)
4. Video signal shading
Set to standard imaging condition
II
. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity
so that the average value of the Gr signal output is 150mV. Then measure the maximum (Grmax [mV])
and minimum (Grmin [mV]) values of the Gr signal output and substitute the values into the following
formula.
SHg = (Grmax – Grmin)/150
×
100 [%]
80
12
1
500
Gra + Gba + Ra + Ba
4
1
10
相關PDF資料
PDF描述
ICX085AL Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor With Square Pixel For B/W Cameras(對角線式、11毫米(2/3型)步進掃描CCD圖像傳感器(具有正方形像素,用于黑白照相機))
ICX086AKB Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AK 1/4-Inch CCD Image Sensor For NTSC Color Video Cameras(1/4 英寸CCD圖像傳感器(用于NTSC制式彩色攝像機))
ICX086AL 1/4-Inch CCD Image Sensor For EIA B/W Video Cameras(1/4 英寸CCD圖像傳感器(用于EIA黑白攝像機))
ICX087AKB Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras
相關代理商/技術參數(shù)
參數(shù)描述
ICX085AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras
ICX085AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 11mm (Type 2/3) Progressive Scan CCD Image Sensor with Square Pixel for B/W Cameras
ICX086AK 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AKB 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
ICX086AL 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 4.5mm (Type 1/4) CCD Image Sensor for EIA B/W Video Cameras