- 您現在的位置：買賣IC網 > PDF目錄383094 > ICX054BL (Sony Corporation) Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras PDF資料下載
參數資料
| 型號： | ICX054BL |
| 廠商： | Sony Corporation |
| 英文描述： | Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras |
| 中文描述： | 對角線6毫米（類型1 / 3）CCD圖像傳感器的環境影響評估/黑白視頻攝像機 |
| 文件頁數： | 17/18頁 |
| 文件大?。?/td> | 340K |
| 代理商： | ICX054BL |
– 17 –
ICX054AK
Notes on Handling
1) Static charge prevention
CCD image sensors are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
a) Either handle bare handed or use non-chargeable gloves, clothes or material.
Also use conductive shoes.
b) When handling directly use an earth band.
c) Install a conductive mat on the floor or working table to prevent the generation of static electricity.
d) Ionized air is recommended for discharge when handling CCD image sensor.
e) For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
2) Soldering
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a ground 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and remount, cool sufficiently.
c) To dismount an image sensor, do not use a solder suction equipment. When using an electric desoldering
tool, use a thermal controller of the zero cross On/Off type and connect it to ground.
3) Dust and dirt protection
a) Operate in clean environments (around class 1000 is appropriate).
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized air
is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the grease stained. Be careful not to scratch the glass.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
e) When a protective tape is applied before shipping, just before use remove the tape applied for
electrostatic protection. Do not reuse the tape.
4) Do not expose to strong light (sun rays) for long periods, color filters will be discolored.
5) Exposure to high temperature or humidity will affect the characteristics. Accordingly avoid storage or usage
in such conditions.
6) CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
相關PDF資料 |
PDF描述 |
|---|---|
| ICX055 | 1/3-inch CCD Image Sensor for PAL Color Camera |
| ICX055BAK | 1/3-inch CCD Image Sensor for PAL Color Camera |
| ICX055BAL | 1/3-inch CCD Image Sensor for CCIR B/W Camera |
| ICX055BK | Diagonal 6mm (Type 1/3) CCD Image Sensor for PAL Color Video Cameras |
| ICX055BL | Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ICX055 | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:1/3-inch CCD Image Sensor for PAL Color Camera |
| ICX055AK | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for PAL Color Video Cameras |
| ICX055AL | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX055ALA | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AREA CCD IMAGE ARRAY |
| ICX055BAK | 制造商:SONY 制造商全稱:Sony Corporation 功能描述:1/3-inch CCD Image Sensor for PAL Color Camera |
發布緊急采購，3分鐘左右您將得到回復。