
Hybrids
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
Spring 2006 Skyworks Proprietary Information. Products and product information are subject to change without notice.
572
87.0
88.5
88.0
87.5
89.0
1.9
2.0
2.1
2.2
2.3
2.4
2.5
Phase
(Degrees)
Frequency (GHz)
Coupled-Direct Phase vs. Frequency
-33
-19
-21
-23
-25
-27
-29
-31
1.9
2.0
2.1
2.2
2.3
2.4
2.5
Isolation
(dB)
Frequency (GHz)
Isolation vs. Frequency
Characteristic
Value
Input power(1)
2 W CW
Input power(2)
1 W CW
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
Absolute Maximum Ratings
0.074
(1.90 mm) Ref.
0.071 (1.80 mm)
0.052 (1.30 mm)
0.037 (0.95 mm) Ref.
0.122 (3.10 mm)
0.106 (2.70 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
0.057 (1.45 mm)
0.035 (0.90 mm)
0.020 (0.51 mm)
0.014 (0.350 mm)
0.126 (3.20 mm)
0.087 (2.20 mm)
Pin 6
Pin 1
Indicator
0.022 (0.61 mm)
0.004 (0.10 mm)
0.014
(0.26 mm)
0.004
(0.10 mm)
0.012
(0.30 mm)
Typ.
5.0° ± 1°
SOT-6
0.091
0.020
0.018
To 50
Termination
In
Coupled
Direct
HY22
Recommended Board Layout
1. When used as a power divider with a 2.0:1 maximum VSWR on all ports.
2. When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Material is FR-4. Dimensions are in inches.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.