參數資料
型號: HPC36064
廠商: National Semiconductor Corporation
英文描述: High-Performance microController
中文描述: 高性能微控制器
文件頁數: 22/37頁
文件大?。?/td> 487K
代理商: HPC36064
MICROWIRE/PLUS
(Continued)
TL/DD/11372–22
FIGURE 24. MICROWIRE/PLUS
MICROWIRE/PLUS Operation
The HPC46064 can enter the MICROWIRE/PLUS mode as
the master or a slave. A control bit in the IRCD register
determines whether the HPC46064 is the master or slave.
The shift clock is generated when the HPC46064 is config-
ured as a master. An externally generated shift clock on the
SK pin is used when the HPC46064 is configured as a slave.
When the HPC46064 is a master, the DIVBY register pro-
grams the frequency of the SK clock. The DIVBY register
allows the SK clock frequency to be programmed in 14 se-
lectable binary steps or T3 underflow from 153 Hz to
1.25 MHz with CKI at 20.0 MHz.
The contents of the SIO register may be accessed through
any of the memory access instructions. Data waiting to be
transmitted in the SIO register is clocked out on the falling
edge of the SK clock. Serial data on the SI pin is clocked in
on the rising edge of the SK clock.
MICROWIRE/PLUS Application
Figure 25 illustrates a MICROWIRE/PLUS arrangement for
an automotive application. The microcontroller-based sys-
tem could be used to interface to an instrument cluster and
various parts of the automobile. The diagram shows two
HPC46064 microcontrollers interconnected to other MI-
CROWIRE peripherals. HPC46064
Y
1 is set up as the mas-
ter and initiates all data transfers. HPC46064
Y
2 is set up
as a slave answering to the master.
The master microcontroller interfaces the operator with the
system and could also manage the instrument cluster in an
automotive application. Information is visually presented to
the operator by means of an LCD display controlled by the
COP472 display driver. The data to be displayed is sent
serially to the COP472 over the MICROWIRE/PLUS link.
Data such as accumulated mileage could be stored and re-
trieved from the EEPROM COP494. The slave HPC46064
could be used as a fuel injection processor and generate
timing signals required to operate the fuel valves. The mas-
ter processor could be used to periodically send updated
values to the slave via the MICROWIRE/PLUS link. To
speed up the response, chip select logic is implemented by
connecting an output from the master to the external inter-
rupt input on the slave.
TL/DD/11372–23
FIGURE 25. MICROWIRE/PLUS Application
22
相關PDF資料
PDF描述
HPC46064 High-Performance microController
HPC3130PBK PCI Bus Interface/Controller
HPC3130PBM PCI Bus Interface/Controller
HPC3130PGE PCI Bus Interface/Controller
HPC467064 High-Performance microController with a 16k UV Erasable CMOS EPROM
相關代理商/技術參數
參數描述
HPC36064XXX/EL20 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
HPC36064XXX/EL30 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
HPC36064XXX/T20 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
HPC36064XXX/T30 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller
HPC36064XXX/U20 制造商:未知廠家 制造商全稱:未知廠家 功能描述:16-Bit Microcontroller